installation tips If the chandelier is used as the main light source in the restaurant, the hanging height of the chandelier should be determined according to the height of the room, the height of the dining table and the size of the restaurant. The hanging wire of most chandeliers is fixed and can only be adjusted before installation. The general chandelier should be about 55---60 cm away from the dining table. If you want to adjust the height of the chandelier in time, you can also choose the luminaire with free lifting device. It should be noted that the hanging height of the chandelier directly affects the illumination range of the light. If the height is too high, the space will be monotonous. If it is too low, it will cause oppression. Therefore, just ensure that the chandelier is on the horizon of the diners. In addition, in order to avoid the shadow of the food under the projection of the light, the chandelier should be installed. Just above the dining table. There are many styles of chandeliers. Some of the three small lamps are arranged side by side. Some are like a wind chime. Some are unique in style. Some small balls are surrounded by each other. Different styles cater to different people. The preference is good. However, some styles are good-looking, but there are security risks. For example, chandeliers arranged by multiple spherical glass shades, if they are irregularly arranged, may be forgotten to close the window for a while. When the wind blows into the house, the wind will blow the ball together and cause the lampshade to break. Therefore, the chandelier composed of multiple light balls should be arranged into an equilateral triangle when installing, so that the ball is stressed. Uniform and not easy to break. General chandelier should be about 55---60 cm away from the table. Maintenance tips If your restaurant is connected to the kitchen, you should always wipe the chandelier or wall lamp in the restaurant with a cloth. Because the cooker hood in the kitchen can't completely remove the fumes from the cooking, the oil smoke accumulates on the lampshade for a long time. It will greatly reduce the lighting effect. Some delicate or inlay-shaped lampshades will be more likely to accumulate dust. If it is not cleaned regularly, the lamps will rust and paint, which will affect the service life. To clean the lamps, be sure to turn off the power. In the case of the case, generally only need to wipe the cover with a damp cloth. The LED emergency driver for panel can be customized from 3W-100W with half power emergency output for emergency lighting 60-300mins. Automatic lighting up when main power failures. Suitable for LED fitting with external led driver. With internal or external lithium battery back up. Widely using for office, building, warehouse, school, hospital, workshop etc. Emergency Led Driver,Emergency Backup Driver for led,Emergency Light Driver,Emergency Driver For Panel,led light emergency power supply Foshan Nai An Lighting Electric Co.,ltd , https://www.ledpowerpack.com
Lamp installation and maintenance tips