Now that the world is in an energy crisis, fuels like energy will become more expensive, which will slowly increase the cost of our drying steps. Energy conservation and emission reduction is a theme that is now advocated.
There is a handle installed on the cabinet body in the
cabinet, which is called buckle free handle in the industry. The
aluminum alloy handle is directly installed on the cabinet body, so that
the door panel is clean without handle.
As
shown in the picture, the Black Buckle FREE handle is selected for the
floor cabinet, which is directly embedded into the cabinet body. The
exterior door panel has no raised handle, which is more neat. The handle of the hanging cabinet is directly hidden under the door panel and is not exposed outside. It looks cleaner.
Now let's see what this handle looks like? As shown below:
The
figure above shows the C-type buckle free handle, which is generally
used in the middle of the floor cabinet, drawer, bowl basket or hanging
cabinet. Available colors on the market are gun color, aluminum alloy natural color, or black, and aluminum alloy bright color.
G handle aluminium profile,aluminum cabinet handle,aluminum handle for kitchen cabinet,aluminium cabinet handle,Gola aluminum profile,aluminium gola profile
The
above figure is an L-shaped buckle free handle, which is generally used
above the cabinet floor to facilitate the opening of the door panel. colour
The figure above shows the special buckle free handle for the hanging
cabinet, which is specially installed on the bottom plate of the hanging
cabinet.
---------Dimension diagram of buckle free aluminum alloy handle---------------------------
After looking at the appearance of this handle, let's talk about its
installation method and the size of the handle: as shown in the figure
below
This is the first type. The aluminum alloy size of the conventional
circular arc cabinet is 20, the height of the middle type C is 70, the
depth is 23, the height of the floor cabinet L is 55, and the units
above the depth 23 {are mm}
This is the second kind. The right angle buckle free handle.
The aluminum alloy size of the hanging cabinet is 20 deep, the middle
C-type height is 73, and the depth is 26. The height of the L-type
cabinet is 57, and the depth is 26
-----------------------------------------------
Knowing the above dimensions, we will find that the dimensions of the
handle are different. Therefore, during processing and production, we
need to determine the type and size of the handle before cutting the
cabinet.
----Explanation of buckle free handle mode for floor cabinet installation------------
A buckle free handle shall be installed above the floor cabinet, and
there shall be a 30 gap between the door panel and the table
The buckle free handle is installed and needs to be fixed with L-shaped angle iron and cabinet side plate
C-type buckle free handle shall be installed at the middle drawer of the floor cabinet
The
above is the schematic diagram of the cabinet body side plate notch and
the installation handle of the floor cabinet. It should be noted that
the aluminum alloy buckle needs to be fixed with L-shaped angle iron. If
there is a drawer in the middle, or the bowl basket needs to be notched
on the middle side plate, the lower door plate exceeds the buckle by
15, the middle buckle of the middle door plate cover is 15, and 30 needs
to be left between the two door plates. The distance between the uppermost door panel and the table top is also
reserved at 30, which is convenient for opening the door panel.
---Explanation of buckle free handle for hanging cabinet installation-------------------------
The buckle free handle of the hanging cabinet is installed on
the bottom plate of the hanging cabinet, and the bottom plate needs to
be retracted 22 in front
There is a swing door in the middle of the hanging cabinet,
which needs to be equipped with C-type buckle, and a 30 gap is reserved
between the door panels
The
above is the schematic diagram of buckle free handle for hanging
cabinet installation. In conventional installation, the front of the
hanging cabinet bottom plate is shortened by 22, and the aluminum alloy
handle is slotted. If there is an upturned door in the middle of the hanging cabinet, it
is necessary to leave a distance and install L-type handle or C-type
handle. Leave 30 gaps between door panels. The middle fixed laminate shall also be moved upward according to the size of the drawing. {note: the buckle in the middle of the conventional hanging cabinet
needs to open the gap on the side plate. If the side plate of the
hanging cabinet leaks, the gap will not be opened}
-------Precautions in design are as follows:-------------------------------------
Note 1: the exposed part of the ground cabinet needs a light
plate to cover the cabinet incision, and the ground cabinet brace needs
to be installed horizontally, so that the buckle free handle L-shaped
fixed angle iron can be installed on the side plate.
Corner treatment scheme of buckle free handle
The first scheme is recommended at the corner of the buckle
free handle. The price of the handle door panel is high, and the handle
is on the edge of the top door panel.
Note
2: since the buckle free handle is installed on the cabinet, the
cabinet price needs to be high when designing the bowl and basket
cabinet to avoid the plate hitting the buckle free handle as shown in
the above video. The cabinet body can be 700 high, including the table top, and the skirting leg can be set to 850 high floor cabinet.
---------Buckle FREE handles can also be used in other customized furniture
The development of the three-cylinder dryer has little effect on the drying field. The previous dryer was large and the efficiency of thermal energy use was only 35%. It can be said that it is a large area and consumes a lot of energy.
The three-cylinder dryer is composed of three concentric circles, and the wet material will go through three processes in it, unlike the ordinary single-cylinder dryer. This makes the interview of the three-cylinder dryer much less than that of the single-cylinder dryer, and the land area is also a kind of resource.
The heat utilization efficiency of the three-cylinder dryer is much higher than that of the ordinary single-cylinder dryer. The heat utilization efficiency of the single-cylinder dryer is about 35%, and the heat utilization efficiency of the three-cylinder dryer is 80. %about. This is because of the design of the three-cylinder dryer. The three cylinders are sleeved together, and the heat radiated from the innermost cylinder is absorbed by the middle cylinder, and the heat radiated from the middle cylinder is absorbed by the outermost cylinder, and the heat energy utilization efficiency is extremely high.
Like a typical single-cylinder dryer, the temperature of the wall can reach several hundred degrees when drying, and the material that is dried out is also more than one hundred degrees. When the three-cylinder dryer is dried, the temperature of the outermost wall is only a few tens of degrees, and the material dried is only a few tens of degrees. This data shows that the heat utilization efficiency of the three-cylinder dryer is much higher than that of the single cylinder.
The development of the three-cylinder dryer is a huge change in the dryer industry, which will replace the previous "stupid" situation and develop towards "smart".
Company website: http://
Gola System Aluminium Profile,Gola Handle Aluminium Profile,Aluminum Cabinet Handle,Aluminium Cabinet Handle
GuangDong XinCheng Material CO.,LTD , https://www.xin-alu.com