Gate Latch,Gate Latch Hardware,Gate Lock Latch,Double Gate Latch Jiaxing Gates Hardware Products Co.,Ltd , https://www.888gates.com
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge>Oscillation bearing is different from ordinary bearing Oscillating bearings are not the same as ordinary bearings
1. Appearance characteristic oscillation bearing: /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
A. The diameter of the roll body is increased; the length of the roll body is increased.
B. Hold the frame by the outer ring rib to guide the roller; reduce the force on the roller.
C. Use the inner ring rib to guide the roller; improve the roller operation.
D. The cylindrical roller bearing adheres to the frame with an integral layout; the strength is greatly improved.
E. The outer diameter of the aligning bearing is depicted with oil groove oil hole; smooth effect is good.
Usually bearings:
A. The roller body diameter and the roll length are both small.
B. Stick to the roller or inner ring guide.
C. The cylindrical roller bearing adheres to the rivet layout; it is easy to loosen and cover.
D. The outer diameter of the aligning bearing has no oil groove oil hole; the smoothing effect is poor.
2. Select the special bearing for data oscillation:
A. The inner and outer rings and the rolling body are made of vacuum degassing bearing steel; the fatigue resistance is good.
B. Adhere to the selection of aluminum iron manganese bronze data; high strength; good elasticity; better wear resistance.
Usually bearings:
A. The inner and outer rings and the rolling body are usually made of bearing steel.
B. Adhere to the selection of zinc brass raw materials; low strength; poor elasticity.
3, heat treatment method oscillation special bearings:
A. The inner and outer rings are selected from Bay-Machine mixed quenching or Martens quenching + high temperature tempering; the hardness is uniform; the internal stress is è— èŒ«è±¢ 茫豢 茫豢 寤骱 寤骱 寤骱 寤骱.
B. When working within 150C temperature; good stability.
Usually bearings:
The inner and outer rings are usually quenched; the resistance is poor; the impact resistance and oscillation function are poor; the thermal stability is not good.
4. Special bearings for public service and production process oscillation:
A. Strictly produced according to P6 precision specifications; special inner and outer diameter public service is very small.
B. The roll scales are different from each other ≤ 0. 002
C. The outer diameter of the cylindrical roller has a convexity; it prevents stress from collecting.
D. Tumbled surface super fine treatment; high finish.
Usually bearings:
A. Usually PO level precision public service (some P6 level specifications) production.
B. Roller grouping ≤ 0. 005.
C. Cylindrical roller without convexity practice.
D. Some raceways are only polished; the finish is low.
5. Special bearings for internal clearance oscillation:
The clearance is produced according to the demand of the oscillating machinery; the scale control is on a small scale; the consistency is good.
Usually bearings:
The play is usually produced according to the specification group or the C3 group; the clearance or the 蚴 段 螅 螅 螅 肷 (12) source.
6, the use of special bearings for oscillation:
Low noise; temperature rise. 榷ã„院茫皇褂 倜ム倜ム倜ム缙谄 缙谄 窒 窒 @ drag 窒.
Usually bearings:
High noise; elevated temperature; poor stability; short service life; early fatigue appearance.
Recommend to friends comments close window Bearing related knowledge The working principle of oil film bearing is a description of the common layout of rolling bearing quality.
Disassemble the bearing on the withdrawal sleeve
Analysis of common problems and causes of KOYO bearings
This article links to http://
Please indicate the bearing network http://
Previous:Analysis: The method of bearing anti-rust Next: CNC machine tool development trend "six"
Oscillating bearings are not the same as ordinary bearings
Source: China Bearing Network Time: 2013-05-31