The structure of a domestic gas stove is generally composed of a burner, an ejector, an ignition device, and a gas supply line. Specifically: large/small fire cover, pot holder, air inlet joint, water tray, rubber ring, valve body, burner, knob switch, panel, nozzle, intake pipe, damper, foot, pulse igniter, piezoelectric ceramic ignition , solenoid valve, flameout protection device, etc. burner 1) There are two burner modes commonly used in domestic gas stoves: partial premixed combustion and fully premixed combustion. 2) Burner head The burner head functions to uniformly distribute the gas and air mixture gas to each of the fire holes for stable and complete combustion. For this reason, it is required that the pressure of the mixed gas at each point of the head is almost equal, and the secondary air can be uniformly supplied to each of the fire holes. In addition, the head volume should not be too large, otherwise it will easily generate flameout noise. Depending on the application of the atmospheric burner, it can be made into multiple firehead heads and single firehead heads. Most of the civil burning appliances use a multi-fired head, which has many forms. When designing the burner head, factors such as the form, size, number of holes, and arrangement of the fire holes should be fully considered. These factors are not determined solely by the burner, but are determined by factors such as the size and shape of the object to be heated and the size of the combustion chamber depending on the application. Commonly used fire holes have the following shapes: 1 round fire hole: the fire hole in the burner head is drilled with a drill bit. This form of processing is simple and widely used. 2 square fire hole (torch shaped fire hole or trapezoidal fire hole): There are two ways of lengthwise and horizontal length. 3 gap fire hole: When processing the fire hole, replace the drill bit with a cutter and process it into a slender groove. This fire hole is called a gap fire hole. Ejector In order to mix the gas with a narrow gas, an ejector is required. The ejector includes a gas nozzle, a primary air regulator (air deflector), a shrink tube, a throat, and a diffuser. Ignition device 1) Piezoelectric ceramic igniter 2) Pulse electronic igniter Gas stove accessories Benchtop frame, embedded bottom case, embedded panel, soup plate, sealing ring, valve body, burner, fire cover, hob, gas pipe/gas pipe, knob, ignition controller, battery box, micro switch , thermocouples, solenoid valves, ignition / flame needles, furnace feet, rubber (silicon) rubber parts, surface treatment, glass / ceramic panels. Thermostatic Bathtub Faucet,Bath Hand Shower Set,Tub and Shower Set,Bath Shower Set kaiping aida sanitary ware technology co.,ltd , https://www.aidafaucets.com
Structure of domestic gas stove