Metal Circular Saw Machine,Angle Iron Cutting Machine,Servo Feeding Machine,Plasma Cutting Machine Shaoxing Sunfong Intelligent Equipment Inc. , https://www.zjsxsunfong.com
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge>Joint bearing Joint bearing
The joint bearing is smooth and self-smooth. The joint bearing is a special type of plain bearing. Its layout is simpler than that of the rolling bearing; it is mainly composed of an outer ring with an inner spherical surface; it can accept a large load; it is different from the inner ring with an outer spherical surface. Type and layout; capable of accepting radial loads, axial loads or combined loads of radial and axial forces. /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
The joint bearing is usually used for the lower speed rocking motion (ie, the angular motion; it can also be used for the skew motion (ie, the centering motion); because the sliding surface is spherical); the bearing shaft and the shaft hole are not When the heart is large, it can still work normally.
Recommend to friends comments close window Bearing related knowledge Method of locking the bearing
JDB bearing---New product bearing device required for mold occupation, common sense needle roller bearing
This article links to http://
Please indicate China Bearing Network http://
Previous:Product Analysis: Needle Roller and Cage Assembly Next: Avoidance of Smooth Oil Quality Deterioration
Joint bearing
Source: Bearing network time: 2013-03-12