1 The importance of moisture control Moisture control is to comprehensively control various factors according to different situations in the whole process of production, so that the final moisture content of the feed processed products reaches the expected target of the producer. The main factors affecting the final moisture content of the feed product are the moisture content of the feed material itself, the moisture change during the crushing stage, the liquid addition amount in the mixing stage, the moisture content of the steam, the quenching and tempering level, the die hole size and thickness of the stamper, and the cooling. Air volume and drying time, packaging quality management, and the impact of different climate factors. High moisture detection accuracy is the basis for control accuracy. Similarly, the accuracy requirements for water addition directly affect the moisture of the controlled mixture. The moisture content of pellet feed is a very important indicator to measure feed quality, which directly affects the quality of pellet feed and the economic benefits of feed enterprises. Effective control of it is a key measure to ensure the quality and safety of feed products. When the moisture content exceeds the prescribed standard, the pellet feed is prone to mildew and deterioration, which is not conducive to preservation, and also reduces the content of nutrients. However, if the moisture content of the product is too low, it will cause unnecessary loss to the enterprise, and the unevenness is uneven. The moisture content also causes instability of product quality and affects the brand reputation of the product. In the feed processing process, the appropriate moisture content is beneficial to granulation, reducing energy consumption and improving production efficiency. Therefore, in the production process of compound feed, the production should be carried out more smoothly, the energy consumption is lower, the particles are smoother and more uniform, and the final product meets the specified moisture content standard, and moisture control must be carried out throughout the production process. In the feed processing process, moisture has a great influence on the individual unit processes of the entire processing program. From the input of raw materials to the output of the product, the appropriate moisture content can not only reduce the processing cost of the feed, but also reduce the energy loss in each process and the mechanical loss of the processing equipment. At the same time, it can also improve the quality of feed products and the efficiency of feed processing, and provide users with reliable feed products. Therefore, each feed processing step has strict requirements on the moisture content of the processed object. 2 feed crushing and material transportation In the process of feed comminution, the moisture requirement of the original material is a factor that cannot be ignored. Excluding other influences, if the moisture of the material is too low, the hardness of the processed object is high, and the labor consumption during processing increases the production cost of the enterprise and reduces the service life of the equipment; if the moisture is too large, it is not easy to be crushed, and the hammer is increased. The number of impacts. At the same time, heat is generated due to the friction of the material and the impact of the hammer, so that the water inside the processing object evaporates, and the evaporated water forms a paste with the pulverized fine powder to block the mesh hole, thereby reducing the discharge of the pulverizer. Therefore, the moisture content of raw materials such as grains, corn, etc. is generally controlled to be 14% or less. When the material is transported, there is also a strict requirement for the moisture of the transport object. When the moisture of the conveying object is too high, the friction coefficient between the material and the conveying device is increased, which reduces the flow property of the material, which not only increases the conveying power of the conveying device, but also increases the friction on the equipment line, and The discharge port is easy to form agglomeration, which is not conducive to the normal transportation and collection of feed. DC Motor Ball Style Ceiling Fan Light Flush Mount Ceiling Fan With Light,Commercial Ceiling Fans,3 Blade Ceiling Fan,Creative Ceiling Fan Light JIANGMEN ESCLIGHTING TECHNOLOGY LIMITED , https://www.jmesclightingfan.com
Feed processing requirements for moisture control