Endless Swimming Pool,Hot Tub Swimming Pool,Endless Pool,Large Swim Spa SpaRelax Co., Ltd. , https://www.sparelaxoutdoorspa.com
First, look. See if there is a quality system certification; see whether the certificate is standardized; see if there is a factory name, site, inspection seal, and production date; see whether the trademark is printed on the wire, specifications, voltage, etc. Also look at the cross section of the wire copper core, superior product copper color bright, soft color, otherwise it is defective.
Second, try. It is advisable that a wire head be repeatedly bent by hand, and that any product that has soft hand feeling, good fatigue resistance, plastic or rubber feel elasticity, and no crack on the wire insulation body is superior.
Third, weigh. Good quality wires are generally within the specified weight range. Such as the commonly used cross-sectional area of ​​1.5mm2 plastic insulated single strand copper wire, weight per 100m of 1.8 ~ 1.9kg; 2.5mm2 plastic insulated single strand copper wire, weight per 100m 3 ~ 3.1kg; 4.0mm2 plastic Insulated single-stranded copper wire weight is 4.4-4.6kg per 100m. Poor quality wires have insufficient weight or are either of insufficient length or have too many impurities in the wire copper core.
Fourth, than the price. Because of the low cost of making fake and shoddy wires, when selling, traders often sell at a low price for good value, which makes people fooled.
Fifth, look at copper. Qualified copper core wire copper core should be purple, shiny and soft to the touch. The shoddy copper core copper core is purple-black, yellowish or white, with many impurities, poor mechanical strength, and poor toughness. It will break when it is hardened, and the wire is often broken. When checking, you just strip the wire 2cm, and then use a piece of white paper on the copper core to make a brief look. If there is black material on the white paper, the copper core contains more impurities.
Wire and cable GB and non-standard wire how to distinguish?
Wire and cable GB and non-standard wire how to distinguish?