The utility model discloses a Kitchen Shower head that is convenient to switch the water outlet mode, has a compact structure, and is easy to use, and a kitchen faucet using the kitchen shower head. , The shower head is provided with a water separator, and the water separator is provided with an annular flow channel and an inner flow channel respectively connected to the spray water outlet body and the V-shaped water outlet body, and the lower end of the outer wall of the water separator is upwardly circular A plurality of water inlet holes connected to the annular flow channel are provided, and a first sealing ring is provided on the lower side of the water inlet hole; the water outlet end of the shower body is connected with a converter, and the converter is provided with a communicating In the water diversion cavity at the water outlet end of the shower body, the lower end of the water diversion device is installed in the water diversion cavity and can move up and down, and the upper end of the inner wall of the water diversion cavity is provided with a convex ring matching the first sealing ring, so The bottom surface of the water diversion cavity is provided with a sealing gasket that can seal the inner flow channel. Waterfall Shower Head,Overhead Shower Head,Push Button Hand Shower,Brushed Nickel Sink Faucet Yuyao Zelin Sanitary Ware Co., Ltd , https://www.zelinshower.com
I mentioned the LCD spelling, I believe many of these words are no stranger. Yes, as the price of LCD splicing products has become lower and lower in recent years, the scope of its use has also expanded. Large to the command and control center, small to KTV, nightclubs and other entertainment venues, LCD stitching has become more and more common.
However, because the LCD splicing products are more professional and relatively late in the market, many people just have some impressions on the word “liquid crystal splicingâ€, but they are not very familiar with the product itself and the market situation, so today the projection era network is particularly You introduce those things you must know about the LCD splicing market. 
From the current point of view, the mainstream upstream panel manufacturers in the LCD splicing market include Samsung, Sharp and LG. Among them, Samsung is the first to enter the LCD splicing market, and his product line is also the most complete; LG is the last of the three to launch LCD splicing products in the domestic market. The products of the three products have certain differences in product size, splicing gap between the units and the panel. Users can choose according to their own needs.
Must know two: product line distribution <br> Product line, basically divided into three camps according to panel manufacturers, this is the Samsung camp, Sharp camp, LG camp. Because their three panel makers are offering splicing products, they also provide the corresponding panels to the market. At present, the panels of LCD splicing products of mainstream manufacturers on the market are basically from these three.
From the splicing gap, Samsung's 6.7mm 46-inch ultra-narrow LCD splicing and 55-inch splicing unit with a seam of 5.5mm, Sharp's 60-inch splicing unit with 6.5mm seam and 6.7mm LG 47 inch splicing unit. From the current market situation, Samsung manufacturers support the largest camp, Samsung's splicing products are also more mainstream. Of course, this has a certain relationship with Samsung's entry into the market earlier. However, with the increasing market promotion of Sharp and LG, the support companies of these two camps have also increased.
Must know three: the product line has to be bottomed out <br> Because of the differences in the products of these manufacturers, such as different seams, different panel sizes, etc., this will lead to some disparity in the price of the product. The user has to have a bottom in mind when choosing. The smaller the seam and the larger the panel size, the better the visual effect it can bring, and the more expensive the price; on the contrary, the smaller the panel size and the larger the seam, the cheaper the unit price. Therefore, users should purchase according to their actual situation.
In addition, because the large-screen splicing products have the characteristics of high technical content, high maintenance difficulty, high capital investment, and difficult construction, users must pay attention to choosing a good reputation in the market. Comprehensive strength of the product to avoid unnecessary trouble later.
A few things you must know about the LCD splicing field
Now LCD splicing has been favored by the majority of people, the author below gives you the opportunity to hang the LCD splicing. Must know one: upstream panel manufacturers <br> Speaking of upstream panel manufacturers, many netizens may have a question, as an ordinary user, is it necessary to understand so much? The answer is of course affirmative, because the core technology of LCD splicing products is basically in the hands of these panel manufacturers, they not only grasp the lifeline of market development, but also lead the market development. Therefore, paying attention to them is equivalent to paying attention to the trend of the LCD splicing market.