XB450 Compressed Asbestos Rubber Sheet
Description:Compressed Asbestos Rubber Sheet is high quality Asbestos Sealing Gasket materials,it made by good asbestos fiber with synthetic rubber ,mixture and compression molding it.
Usage:Suitable for high temperature and high pressure,temperature 450 centigrade and 6.0MPa,for water and saturated vapour,super vapour,gas inert gases transmitted in the joints of facilities and pipelines.
TEMP:450℃(max)
PRESS:6.0MPa(max)
Dimension:
1500×1500mm;1500×1000mm;1540x1360mm
1270×1300mm; 3810×1300mm
Thickness: 0.5~6.0mm
Technical data:
Lateral Tensile Strength/MPa ≥ 18.0
Aging coefficient ≥ 0.9
Loss on ignition/% ≤ 28.0
Compression ratio/% 7~17
Recovery/% ≥ 45
Creep relaxation rate/% ≤ 50
Density(g/cm3) 1.6~2.0
Product photoes:
XB450 Compressed Asbestos Rubber Sheet Xb450 Compressed Asbestos Rubber Sheet,Compressed Asbestos Rubber Sheet,Compressed Rubber Sheet,Compressed Rubber Gasket Sheet HEBEI HENGDA SEALING MATERIALS CO.,LTD. , https://www.hengdasealing.com
4100×1500mm; 4500 x 1500mm;2000×1500mm;
Corrosion-resistant magnetic pump uses and features
[Asia Pump Network News] Corrosion-resistant magnetic pump as the name implies is used to transport a variety of corrosive liquid pump. Because of its material corrosion-resistant pump has a wide range of excellent corrosion resistance, easy maintenance and other advantages, so the use of the most extensive range. Corrosion-resistant magnetic pump design not only has the general structure of a compact magnetic pump, good looks, small size, low noise, reliable operation, etc., and the flow of all the components used in the current corrosion resistance of the world's best "King of Plastic" (Fluoroplastics), the isolation sleeve made of special materials, with high mechanical strength, eliminating the magnetic eddy current phenomenon of the ordinary magnetic pump. Therefore, CQB fluorine plastic magnetic pump can deliver any concentration (strong) acid, alkali, oxidants and other corrosive media without any damage. Corrosion-resistant magnetic pump is the chemical process to eliminate running, running, dripping, leakage phenomenon, eliminate environmental pollution, creating "no leakage plant" "no leakage plant" to achieve safe and civilized production ideal pump. Corrosion-resistant magnetic pump is widely used in chemical, acid, alkali, smelting, rare earth, pesticides, dyes, pharmaceuticals, papermaking, electroplating, electrolysis, pickling, radio, foil, research institutes, defense industry and other industries at any concentration Acid, Alkaline, Oil, Rare and Valuable Liquid, Toxic Liquid, Volatile Chemical Medium. In particular, easy to leak, flammable, explosive liquid transport. Corrosion-resistant magnetic pump temperature: -50 ℃ ~ 120 ℃ (more than 100 degrees when the need to select some of the main material). Corrosion-resistant magnetic pump Features Corrosion-resistant magnetic pump is the application of modern principles of magnetism, the use of permanent magnets to achieve non-contact indirect movement of a chemical process pump. When the motor drives the outer rotor (ie outer magnet) assembly to rotate, the magnetic field lines move the inner rotor (ie inner magnet) assembly and the impeller synchronously through the action of the magnetic field, and the medium is completely enclosed in the stationary isolation sleeve , So as to achieve the purpose of non-leaking pumping media and thoroughly solve the shaft seal leakage of the mechanical transmission pump. The utility model is a completely sealed, leak-proof and non-polluting new industrial pump. Further reading: industry leaders IFAT China Guangzhou Exhibition building water pump manufacturers ranking article belongs to Internet industry (Xiamen) Co., Ltd. All are welcome to reprint, please indicate the source and author of: Asian pumps Network Editor: gogoing (QQ / WeChat:) Starting: http://beng.liuti.cn/ (Service Hotline:)