Solar controllers are mainly used in solar power supply systems such as homes, commercial areas, factories, transportation, pastoral areas, and communications. It is suitable for all kinds of DC light sources. The light sources supporting large quantities include 12V and 24V (0-10A) LEDs, electrodeless lamps, energy-saving lamps, high-pressure sodium lamps, and ordinary light bulbs. According to the special design of solar lighting products. There are two load-carrying products, including 12V and 24V systems. At night, the solar street light controller light-control intelligence automatically turns on the lighting load, using the full-voltage opening method, for energy-saving lamps and high-pressure sodium lamps, etc., can light the load at one time, avoid starting the load multiple times, and extend the life of the light source. To avoid over-discharge recovery, as long as there is an over-discharge, the controller will lock, automatically cut off the load, completely protect the battery, and then avoid the load flickering back and forth and damaging the light source. The charging method adopts high-efficiency PWM charging, which increases the power consumption time; the normal direct charging, multiple floating charging, constant voltage small current trickle charging automatic control mode makes the system have a longer service life; improve the system's use efficiency. When the battery reaches the overcharge voltage, the charging circuit is disconnected. Fully automatic control of overcharge, overdischarge, battery polarity reverse connection protection, battery open circuit protection, solar battery polarity reverse connection protection, anti-reverse charge, etc. There is an intuitive LED luminous tube, which reflects the current working status of the system and allows users to understand the use status. Using advanced non-contact control, it can be used normally in cold, humid, and high temperature environments, and can be adapted to harsh outdoor locations. With light control intelligent start mode (dark when the solar battery voltage is less than 5V, the load is automatically turned on, and the daylight battery voltage is higher than 6. The load is automatically cut off when the voltage is above 5V). Start + over-discharge protection off + timing delay off mode, timing delay off time can be set arbitrarily (2h 4h 6h 8h, etc.). The solar street light controller can make the entire solar photovoltaic system operate efficiently and safely. It coordinates the work of solar panels, batteries, and loads, and is a very important component in the photovoltaic system. The solar street light intelligent controller is mainly used in solar street lights, LED solar lights, solar garden lights, solar power generation systems, etc.! Yangzhou solar street lamp manufacturers mainly produce and sell: solar street lamp series, led street lamp series, high pole lamp series, Chinese lamp series, courtyard lamp series, lawn lamp series, various other special street lamp series, undertake road lighting projects, etc., Hanging Painting Figure Painting,Figure Decoration Hanging Painting,Figure Hanging Painting,figure decoration painting The universe in the stone is great , https://www.zdartwork.com
Yangzhou street lamp manufacturers, solar street lamp price consultation telephone, 15050780308
Website: http: //
Op is about to appear at the 2018 Hong Kong International Autumn Lighting Fair and use technology to light up smart life