Nowadays, many people prefer to second-hand housing when they purchase real estate. Compared with new houses, these houses are not only lower in total price, but also satisfy people’s desire to stay in the house as soon as possible. However, the use of second-hand housing after years of use, the wall will look very old, in order to better enhance the quality of life of the family, we need to refurbish the second-hand housing , then the second-hand housing wall renovation process is what?Second-hand housing wall What are the considerations? The following article will share these issues with you and look forward to helping those in need. Second-hand house wall renovation process - clean up the old wall surface After a long-term use of second-hand housing, not only will there be a lot of dust and stains on the surface of the wall, but hollowing and cracking may also occur. Therefore, in the face of refurbishing the wall, we must first clean up the wall. For the old wall surface, the floating ash shall be removed first, and the sanding and chapping shall be removed. For the parts of the oil, the original coating shall be removed first, and the eradicating shall not be thoroughly cleaned. Second-hand house renovation process - putty Then everyone will need to do a wall base treatment, that is putty. In order to ensure the quality of the construction, we should use a filler with a high fineness of particles and a white latex in the putty to increase the hardness of the putty. After the putty is dry, the putty layer can be polished. We try to use finer sandpaper, generally softer putty (such as 821) with 400-500 sandpaper, hard texture (such as wall lining, easy to flat) with 360-400 better. Second-hand house renovation process - paint Before painting the walls, everyone should mix the latex paint evenly. If the viscosity of the paint is high, everyone can add a small amount of fresh water to dilute it. After the latex paint is evenly mixed, everyone can start painting. First on the primer, the primer must be evenly brushed to ensure that the walls are brushed in every place. If the wall has a large amount of paint to eat, it is best to add a little water to the primer to ensure even brushing. After the primer has dried, it can be painted. When everyone paints on the top, do not add too much water. This will affect the film thickness, feel and film hardness. Try to choose a better tool. The paint film will feel fine. Secondary Housing Wall Renovation Process - Maintenance In order to make the walls look better, everyone needs to maintain the walls. This is because the water-based paint will dry after four hours of spraying, but the dried paint film does not reach a certain hardness, which requires care. Nursing is actually very simple. Everyone should not scrub or touch the wall within 7-10 days. What are the notices for renovation of second-hand housing walls? In fact, the renovation of second-hand houses has only one more step compared to brushing the walls, that is, cleaning the old walls. In order to make the walls of second-hand houses look a lot better, everyone should maintain good indoor ventilation during construction and must not work under conditions where the ambient temperature is lower than 5°C or the humidity is higher than 70%. In addition, it is forbidden to mix with other coatings and organic solvents. The construction area is 6-8 square meters per kilogram. The above is about the second-hand housing wall renovation process and second-hand housing wall renovation precautions which are relevant to share, for everyone to make a reference! If you have more related issues, welcome to continue to pay attention to this site, the latter will be for everyone More exciting content. Allen Bolt,stripped allen bolt,csk allen bolt,flat head allen bolt Jiangsu Minglu Stainless steel Co.,ltd , https://www.minglufastener.com
Second-hand housing wall renovation process second-hand housing wall renovation considerations