The history of the shower room is much shorter than that of the bathtub, but the shower room is more convenient and sanitary. Therefore, in the decoration of the house, the shower room has become the choice of many citizens. How to install the shower room, Xiaobian to recruit. 1, carefully instructions, and check whether the product parts are complete 2, the shower curtain rod is generally installed at a height of about 2.06 meters from the ground (the specific situation can be determined according to personal habits, as well as the height of the bathroom). Put the shower curtain rod in the position where it needs to be installed, and try to determine the drilling position and make a mark. 3. Drill holes in the wall with a drill bit of 12 mm diameter (drilling depth is about 6 cm). When drilling, let the drill bit slightly down, and the buttocks slightly upward after the drill, which can effectively prevent the shower curtain rod from sagging. 4. Drive the tented wire with the fitting into the wall and tighten the tent. 5. Apply some glass glue on the cylinder according to the assembly (the purpose of coating the glass glue: one is to increase the lubrication, it is easy to install; the other is that after the glass glue is solidified, the shower curtain rod will be more durable). 6. Clean the wall and wipe off the excess glass glue. After 24 hours, it can be used normally. 7.5M Measuring Tape,Tape Measure Tool,Precision Tape Measure,Tape Measure For Sale SHANGQIU CHAOYUE MEASURING TOOLS CO., LTD , https://www.chaoyuetools.com
Shower room installation Raiders