How to gamble on the jade gambling stone? This is the key to this article. It mainly uses three methods of rubbing, cutting and grinding to realize its gambling skills. Under normal circumstances, how to rub, how deep it rubs, and how much rubbing in the rubbing process, even if the stone can be rubbed in the end Have to think clearly. The same is true for cut stones. It can also be cut across the board. It is also possible to have a one-size-fits-all approach. There is a jargon in the industry: it is not a rise in the rise, but a rise in the rise. Whether this jade can be cut and how to cut it is determined by the gambling experience and luck of the gambling stone for many years. The grinding is only to see the texture color and wateriness of the jade itself. Under normal circumstances, the grinding process needs to pay attention to it. In the process of gambling stone, in addition to the above techniques, it is also necessary to check the crystallization of the jade material. Under normal circumstances, the crystallization of the leather of the jade gravel is relatively larger, the structure is soft, the hardness is low, and the transparency is low. Relatively speaking, it is not very good. The jadeite jade is the lower part of the jadeite. In return, the jade material has fine crystals and compact structure. The texture of the jade material is also fine, the hardness is high, and the overall color is transparent. Its surface has a certain luster, black or black and red, this jade is the top of the jade, in the jargon, it is "dogs and eggs." The jade material of jade sand leather has its own nature between the former two. The quality of jade quality changes relatively large, but it must be carefully searched, and it can also find good materials, and its gambling in the line is relative. The strongest, some people are very willing to challenge their own vision, and this is also an affirmation of their gambling vision.
Sub-controller
of LED applying system. The DMX-S8 receives the pixel data frame sent by the
RTP-S1500 Main Controller. According to the address set by itself, the
corresponding data in the pixel frame is taken out. After the format is
adjusted, the data is sent out from the controlling port at a specific timing
sequence to control the LED light to change color. Set up 2 RJ45 network interfaces; When using unshielded Twisted Pair, the distance of transmission from
the main controller to the sub-controller and sub-controller to sub-controller
is more than 100 meters; Connect to the switch for network to extend the distance of
transmission; Single controller can connect up to 16 computer; Automatically
identify its position in the system; Set up 8 DMX512 controlling ports with auto-addressing function. The
number of single-port controlling pixels is 170 full-color pixels, 512
monochrome pixels, and the type of connector is the pluggable terminal; Each port conduct optical isolation protecting to ensure the stability
of the entire controlling system;
Sub-controller,Sub Controller,DMX 512 Sub Controller,Auto-addressing Sub Controller,LED Lighting System Sub Controller StrongLED Lighting Systems (Suzhou) Co., Ltd. , https://www.strongledcn.com
Jade gambling skills