Due to the low threshold of the industry, the indoor environmental problem of furniture pollution has become the third major pollution problem after construction pollution and decoration pollution. Therefore, office buildings and families should pay special attention to indoor environmental pollution control during decoration and decoration, and strictly control materials, design, crafts and furniture selection. Experts have pointed out that since furniture pollution involves the whole material, production process and post-production processing of furniture, consumers should prevent and control furniture pollution from three aspects when purchasing. Main points of pollution prevention and control of solid wood furniture Choose wood lacquers and adhesives that meet national standards. Mixed oil furniture should pay attention to the heavy metal content required by national standards. New furniture is best used for a period of time; some solid wood furniture is used for anti-corrosion treatment or chemical treatment materials such as preservatives. If the surface is not completely closed or even closed, harmful gases will be released; some solid wood furniture is not completely Solid wood, especially some wardrobes, bookcases with wood-based panels, pay attention to the problem of formaldehyde release, select the wood-based panels in line with national standards, and at the same time the surface is closed and treated. Main points of pollution control on wood-based panel furniture The pollution control points of wood-based panel furniture must be in accordance with the national requirements for the limit of harmful substances in furniture. The formaldehyde emission is ≤1.5mg/L; the wood-based panels used for furniture should be completely sealed, including drawers and partitions. All concealed end faces; double panels are required for furniture backing, lining and drawer bottoms. At present, most of the wood-based panel furniture backing, lining and drawer bottoms use low-grade single-panel, which is the main source of formaldehyde release. Main points of pollution control on fabric furniture The main points of pollution control of fabric furniture, especially the fabric sofa, are the main problems causing indoor environmental pollution. Pay special attention to the quality of the filler and the adhesive. Consumers should open the inspection when they purchase, to see if it is a small piece of glue. Commonly used distance measurement methods include tape measure distance and photoelectric distance measurement. The measuring distance of a tape measure is measured along the ground using a tape-like ruler that can be rolled up, which is a direct measuring distance. Photoelectric ranging is to use an instrument to transmit and receive modulated light waves between two points, and measure the distance according to its propagation speed and time. It belongs to electronic physical ranging. Photoelectric ranging is indirect ranging. Inch Tape Measure,Tape Ruler Measurements,Length Tape Measure,1 Inch In Tape Measure Yucheng tengxu Measuring Tool Co., Ltd , https://www.txhardwaretools.com
Three major points to prevent and control furniture pollution give you a healthy home life
Jc001.load('iframe') JIFrame.create({ 'url' : '/go.php?action=ads&iframeHeight=250&isIframe=1&key=%BC%D2%BE%DF&pos_id=jc001_news_detail_30&reqkey=1&style=margin%3A15px+15px+ 25px+0%3B+height%3A255px%3Bwidth%3A255px%3B+float%3Aleft%3B', 'height' : 250 })