In the summer of July, the weather is hot, the hottest time of the year comes, the high temperature is everywhere, the unsaturated resin and the raw materials are between the two days, the raw materials styrene, diethylene glycol, ethylene glycol stabilized and rebound, intended Raising the market quotation, there is a turning point in the upward trend, but the UPR market is still cold and cold, and the manufacturers are basically not moving, continue to slowly consume inventory, preferential shipping. According to the monitoring data, as of mid-July, East China styrene rebounded from the previous period of 10,650 yuan / ton to 11,600 yuan / ton, up nearly 1,000 yuan / ton, diethylene glycol rebounded from 5,600 yuan / ton to 6,080 yuan / ton, The increase was 480 yuan / ton, ethylene glycol rebounded from 6,800 yuan to 7,400 yuan / ton, an increase of 600 yuan / ton, the rise of mainstream raw materials, the market bearish atmosphere gradually dissipated, but the resin is generally stable, the price is clear There is no room for further reduction, and it is difficult for the industry to get rid of the shipping pressure during the off-season. The comprehensive operating rate of unsaturated resin domestic plants is 45-47%. In the past two years, the environmental protection inspections have been frequent. It has become the normalization of the industry. The medium and small factories have been affected more. The large-scale factories are equipped with complete facilities and pre-construction. At the time, environmental protection equipment facilities have been put into use, and subsequent updates are also timely, so the impact is minimal. A considerable part of the downstream terminal of its unsaturated resin is related to the FRP field. According to Zhongyu Information, the main downstream flow of UPR is the three major markets, the largest of which is the enhanced use of FRP products up to 55%. Other uses Such as storage tanks, storage tanks, grilles, filling boards, towers, chimneys, anti-corrosion floors and building anti-corrosion. The other category is non-reinforced glass fiber reinforced plastics, such as artificial stone, handicrafts, buttons and other markets. The environmental pressure of the largest downstream FRP enterprises is also several times that of the unsaturated resin industry. The smell of the resin stored in the glass factory and the dust generated during the cutting process all affect the ecological environment, and it is also a difficult point for enterprises to solve. From the perspective of green ecology in the past two years, the demand for FRP and products is likely to increase, and the factories are mostly produced on demand. Therefore, the demand for unsaturated resin in FRP is decreasing. This year's Sino-US trade disputes are escalating. The US anti-dumping investigation on Chinese-made quartz stone is also a serious impact on the living environment in the industry. Because its main export destination is the United States, some unsaturated resin companies in the South are directly affected. There are uncertainties in the impact and downstream orders. It is reported that companies are currently accelerating the production of orders to avoid subsequent uncertainties. On the whole, the trend of the unsaturated resin market has been different from the raw materials, and the rise of raw materials will not affect the resin for the time being, unless there is more room for pulling up. In the short term, the resin market will focus on downstream orders and the market will run stably.
Engineering Veneer is a thin sheet of wood, rotary cut, sliced or sawed from expensive natural wood. The Veneer is easy to be edge jointed and overlaid on Plywood , MDF, particleboard and so on. So, it can be used in fancy plywood, fancy MDF, fancy Blockboard and veneer faced Particle Board.We have Natural Engineering Veneer and Engineering Fancy Veneer
Luli Group Co., Ltd, also supply engineered wood veneers with good quality and competitive pricing.
Advantages of using veneers:
Compared to wood, one of the primary advantages of using veneer is stability. While solid wood can be prone to warping and splitting, because veneer is made of thin layers of wood glued together, the chances of splitting or cracking are reduced. Further, the glue used provides additional strength, making the end result stronger than natural wood.
Usages of Veneer:
Used to cover the surface of plywood, MDF, chipboard, blockboard and so on.
Specification details:
Sizes: 1220mm x 2440mm, 1250mm x 2500mm or as your request
Thickness: From 0.15mm to 0.6mm or as per request
Species: Okoume, Bintangor, Terminalia, Red hardwood, etc.
Grade available: A/A, A/B, B/B
Cutting way: Rotary cutting
Engineering Veneer Engineering Veneer,Natural Engineering Veneer,Engineering Fancy Veneer,Engineered Wood Veneer Luli Group Co.,Ltd. , https://www.plywoods.nl
Unsaturated resin: raw materials rose upr market low support enhanced
/*kangxianyue 250*250 was created on 2017/3/29*/ var cpro_id = "u2939694";