Tiles Nature Floor Cement Windows Floor Tiles Kitchen Wall Tiles Bathroom Wall Tiles Bathroom Tiles Professional Laser Rangefinder Professional Laser Rangefinder,Laser Rangefinder,Optical Laser Rangefinder,High Precision Rangefinder Rxiry (Jiangsu) Optoelectronic Co., Ltd , https://www.rxiryrangefinder.com
Attention should be paid to the problem of row bricks when pasting corners: The width of non-complete bricks should not be less than 1/3 of the whole brick, and non-complete bricks should be used at inconspicuous parts or inside corners. Use a whole brick. There are several parts for the acceptance of bricklayers: first within two meters, the error should not exceed 2mm, brick joints should be tidy, uniform in size, there must be no empty drums, no looseness, and a two-meter ruler or ruler should be used for acceptance. Secondly, a small hammer can be used to gently tap on the ground or the wall without empty drums. Finally, it should be noted that the slope of the floor tiles with drainage requirements should meet the drainage requirements and should be tightly integrated with the floor drain.
Paving wall tiles and floor tiles should pay attention to what
Wall tiles and floor tiles mainly refer to the work of bricklayers. Paving bricks should be soaked in water, should be soaked the next day, dry to the surface without water stains before paving. When cementing, the cement floor should be moistened with water. Apply cement mortar (with 20% of 107 glue) on the back of the brick. Make sure the joints are tightly stitched and adjust immediately. Bathrooms, kitchens, balconies, floor tiles, floor tiles must be tilted to a floor drain, and the slope should be controlled at 2% (3mm).