Brick entrance decoration cement decoration design home decoration decoration Lever Chain Hoists,Small Chain Block,Chain Block 1 Ton,Hand Chain Block Guangdong Gongyou Lift Slings Machinery CO.,LTD , https://www.workmateslift.com
â– Should the floor tiles purchased in the market check their quality?
A: Since there are so many brands of such products on the market, even if some experts in this area are very difficult to figure out, it is very necessary to check the quality of products in order to be responsible for the project.
â– Check the quality of floor tiles from several aspects?
A: According to the author's experience, the quality of floor tiles should be checked from three aspects: First, check the surface flatness of the tiles. Some floor tiles are not very easy to pass because of the production process, and the surface of the bricks is twisted. This will inevitably affect the paving of the floor tiles and their future use. Second, check the dimensional error of the tiles. Many bricks have large dimensional errors. If such a product is used, it will definitely affect the future visual effects. Third, check the strength of the floor tiles. Some poor-quality floor tiles have a relatively low intensity and a service life that is far less than what consumers assume.
â– What preparations should I perform before laying floor tiles?
Answer: First, clean up the floor to be constructed and clean it. At the same time, bake the floor tiles that are ready for inspection and use clean water for about 12 hours. Set the initial position of the paste according to the ground conditions.
â– Under what circumstances is the floor tiles prone to emptying?
Answer: In five cases, the floor tiles are prone to emptying: First, the ground is not clean, the cement mortar of the bonded floor tiles cannot be tightly integrated with the ground; second, the proportion of cement mortar is not correct, and the proportion of sand is too high. Or, no adhesive is added to the mortar. Third, the proportion of water added to the cement mortar is too high. The cement mortar gradually separates from the floor tile during the drying process. Fourth, workers do not use the rubber hammer to hit the floor tile when paving the floor tile. The combination of floor tiles and cement mortar is closely linked to the occurrence of empty drums. Fifth, after the floor tiles have been laid, cement mortar has been trampled without dry floor tiles. This is one of the main reasons why empty floor tiles have appeared.
â– Is it feasible to use special materials for pavement tiles?
A: Nowadays, there are some alternative materials for cement mortar that work well; after it can be diluted with water, it is directly bonded to the floor tiles, and it's strong and durable. However, there are a lot of materials in the market, and the quality is far from one another. And the price is less realistic than the value; therefore, many construction teams are cautious when they choose.
â– What is the effect of using white cement on the brick joints after the floor tiles are installed?
A: This role is mainly for the use of the process to avoid blocking the brick dust impact visual effects.
The construction of the wall tiles Due to the family decoration, the walls of the wall tiles are hollow during use, and there are many phenomenon of shedding. Therefore, how to paste the wall tiles and reduce the shedding of the wall tiles is actually a seemingly simple, in fact very complicated. problem.
â– Does the wall brick have special requirements for construction?
A: Some wall tiles are designed with dark patterns under the glazed surface of the brick body. Therefore, before the construction, whether the wall tiles have directional requirements should be well known; otherwise, after the paste is finished, it is possible. When it appeared in the light, we found that the wall was a mess.
â– How to deal with the construction of the wall?
A: For the neat wall surface, you can generally use the method of cutting the wool to perform the treatment: First, use a tool to make a uniform and straight hair surface on the smooth wall (commonly known as the hair removal); then, use 1:1.5:0.2. The prime cement mortar slurries on the wall. It should be noted that the wall should be moistened with water before dripping.
â– Why do I need to set a baseline for pasting a wall tile?
A: The purpose of setting the baseline is to keep the tiles flat and keep the entire tile as close as possible to the surface.
â– What is the purpose of leaving a seam between each wall tile when pasting a wall tile?
A: There are two purposes for leaving seams when pasting wall tiles: first, in order to adjust the dimensional errors of the wall tiles, to grasp the overall appearance; second, to reserve the expansion joints for sagging of the wall tiles, and to avoid the upper wall tiles The extrusion of the next row of wall tiles has hollowed out the wall tiles and fell off.
How to spread the wall tiles
Floor tiles are the most commonly used floor materials in home decoration projects. Therefore, the construction quality of floor tiles has become a project that consumers are more concerned about. However, due to the large number of manufacturers of floor tiles and the uneven quality of products, there are also a number of disputes concerning the quality of works.