Construction Standard Hydraulic Oil Cylinder for Flat Vulcanizing Machine

Technical Parameter

XLB and ZL series are used for flat vulcanizing mchine. They are 9 different models. Piston size is 160mm; Rod size is 110mm; Stroke is 150mm.

Company Introduction
Built in 1973
Total area 456000 square meter
400 employees, 70 engineers
More than 400 sets equipment
National Patents: 71
 
Management System
                        ISO9001                                         ISO/TS16949                                    IPR


Quality Control
We use Solidworks to design cylinders and do force analysis.
Inspection process: incoming inspection, sampling inspection, process inspection and pre-shipment inspection.
Before the production, we will do chemical composition tests. The uninspected materials are stored in special positions and all inspected materials are able to be traced by size, supplier and date.
During the production, the process cards are placed around to make sure that the workers understand every step clearly. The products are marked for tracking.


Packing & Delivery
The products are fully protected by metal shelves, wood boxes and plastic fillers.


Sales Network
Our products have been exported to North America, Europe, Russia and Southeast Asia, etc. We have established a branch in USA.


Products Application
Our products are mainly used in following industries like car lift, agricultural machines and environmental vehicles. With high quality products and considerate after-sales service, we have established a well-known reputation.


FAQ

Q1: Are you a trading company or manufacturer?

A1: We are the manufacturer with Exporting License.

Q2: How long have you been in Hydraulic Cylinder industry?

A2: Our factory is built in year 1973 and start by manufacturing Pneumatic Cylinder. From year 1985, we start manufacturing Hydraulic Cylinder.

Q3: How long is your warranty period?

A3: We offer 13 months warranty period after on board.

Q4: How long does it take to process orders?

A4: It usually takes 20-30 days to process. We don't have stock.

Q5: What's your cylinder PPM?

A5: 5000 PPM. We do 100% inspection before delivery.

Q6: Have you been exported to overseas?

A6: We have been exporting to USA, Canada, Germany, Italy, France, Russia, etc.

Lena Li 

Tel: 86-535-6523027        Fax: 86-535-6528663 

Website: www.fasthydraulic.com  www.yantaifuture.cn

Technical Parameter

XLB and ZL series are used for flat vulcanizing mchine. They are 9 different models. Piston size is 160mm; Rod size is 110mm; Stroke is 150mm.

Company Introduction
Built in 1973
Total area 456000 square meter
400 employees, 70 engineers
More than 400 sets equipment
National Patents: 71
 
Management System
                        ISO9001                                         ISO/TS16949                                    IPR


Quality Control
We use Solidworks to design cylinders and do force analysis.
Inspection process: incoming inspection, sampling inspection, process inspection and pre-shipment inspection.
Before the production, we will do chemical composition tests. The uninspected materials are stored in special positions and all inspected materials are able to be traced by size, supplier and date.
During the production, the process cards are placed around to make sure that the workers understand every step clearly. The products are marked for tracking.


Packing & Delivery
The products are fully protected by metal shelves, wood boxes and plastic fillers.


Sales Network
Our products have been exported to North America, Europe, Russia and Southeast Asia, etc. We have established a branch in USA.


Products Application
Our products are mainly used in following industries like car lift, agricultural machines and environmental vehicles. With high quality products and considerate after-sales service, we have established a well-known reputation.


FAQ

Q1: Are you a trading company or manufacturer?

A1: We are the manufacturer with Exporting License.

Q2: How long have you been in Hydraulic Cylinder industry?

A2: Our factory is built in year 1973 and start by manufacturing Pneumatic Cylinder. From year 1985, we start manufacturing Hydraulic Cylinder.

Q3: How long is your warranty period?

A3: We offer 13 months warranty period after on board.

Q4: How long does it take to process orders?

A4: It usually takes 20-30 days to process. We don't have stock.

Q5: What's your cylinder PPM?

A5: 5000 PPM. We do 100% inspection before delivery.

Q6: Have you been exported to overseas?

A6: We have been exporting to USA, Canada, Germany, Italy, France, Russia, etc.

Lena Li 

Tel: 86-535-6523027        Fax: 86-535-6528663 

Website: www.fasthydraulic.com  www.yantaifuture.cn

Electric Paint Mixer 2 Speed

A powerful dual-handle 1200W 1400W Electric Paint Mixer is an ergonomically designed Power Tool for mixing heavy-duty materials Fast and conveniently.

The Plaster Mixers provides optimal performance and splash-free use in all materials.

The 1400W Paint and Cement Power Mixers are mostly used in construction and related industries such as infrastructure.

Electric Paint Mixers, as their name shows, are used for mixing paint. With a M14 mixing Bar and variable motor speed 100-700rpm, which can go higher depending upon the viscosity of the paint and usage, and Max. 65N.m working Torque.

Electric paint mixers can be used for domestic as well as professional jobs. Their ergonomic design makes it easier to operate and popular among amateurs.

Electric Paint Mixer 2 Speed,Electric Putty Mixer,Paint Mixer Electric,Electric Paint Mixer Machine

Ningbo Brace Power Tools Co., Ltd , https://www.bracepowertools.com