Anti-magnetic: Because the ceramic bearing is non-magnetic and does not absorb dust, it can reduce the early peeling of the bearing, noise, etc., and can be used in demagnetization equipment. Precision instruments and other fields. Zirconia Ceramic Shaft,Resistance Zirconia Ceramic Rod,Zirconia Ceramic Piston Shaft,Ceramic Shaft Dongguan Haikun New Material Co., Ltd. , https://www.nitrideceramic.com
Analysis of the cause of embrittlement of the dust bag: the effect of acid, alkali, or other organic agents in the bag filter; corrosion effects of other factors on the dust bag. Solution: bag filter for anti-corrosion treatment; use a special material dust bag.
Causes of clogging of the dust bag: 1) The use time of the dust bag is too long. Solution: Replace the old dust bag and check the reason; 2) The processing gas entering the filter contains water leakage. Solution: handle and repair the bag filter; 3) The wind speed of the bag filter is too large. Solution: Plugging the dust collector to reduce the wind speed and strengthening the dust removal; 4) The dust removal effect of the dust collector is poor. Solution: Check the dust removal mechanism of the bag filter.
Insulation Due to the high resistance of ceramic bearings, it can be protected from arc damage and can be used in various electrical equipment requiring insulation.
self-lubricating characteristics Because of the unique oil-free self-lubricating properties of ceramic bearing materials, in the ultra-high vacuum environment, it can overcome the problem that ordinary bearings can not achieve lubrication.
High-speed ceramic bearing has the advantages of cold resistance, small elasticity, high pressure resistance, poor thermal conductivity, light weight and small friction coefficient. It can be applied to high-speed spindles of 12000 rpm/-75000 rpm and other high speeds. In precision equipment;
Causes and solutions to the problem of embrittlement or clogging of dust bag
In the modern industrial production process, due to the need of the process, the performance requirements of the dust bag are also increasing. Dust bags in use, such as timely maintenance and use of scientific methods to play its maximum dust removal effect, but also can extend the service life of 3-5 months. Dust bag aging is mainly caused by the following reasons: due to abnormal high temperature hardening contraction; due to contact with the acid, alkali or organic solvent vapor reaction; and water reaction, the cause must be investigated, take elimination measures and replace the dust bag.