SC757E2 German Lucas/Lukas hydraulic multi-function pliers instructions for use

I. Introduction to Lucas, Germany

Lukas began production of hydraulic equipment in Germany in 1948. From 1962 to 1972, Lukas installed derailment and rescue equipment for all types of German trains and carried out rescue technology research; 1990-1993 The factory moved into Erlangen, Germany, and the company officially changed its name to LUKAS Hydraulic Equipment Co., Ltd.

The hydraulic equipment produced by Lukas in Germany has a certain reputation throughout the world.

II. Introduction of SC757E2 Heavy-duty Electrohydraulic Multifunctional Pliers

SC757E2 type giant electro-hydraulic multi-function pliers are AC, DC dual-purpose electric rescue tools, no external power source and tubing, each tool can be operated by pressing a switch, no need to consider the power source can drive the number of tools, shorten Rescue time is an ideal tool for quick rescue. Single operation, the use of LUKAS unique star-shaped manual valve operation is more convenient and safe.

The whole set of tools does not require a power pump set and hydraulic hose. Two power supply methods are used. The 220V AC power supply and the 25.2V DC power supply can be quickly replaced. The two are installed in the same position. The tool is equipped with LED lights for nighttime lighting. The LED lamp and the hydraulic system share the same power supply, and no additional battery is required. The LED lamp in the work area can also illuminate. The device uses a lithium battery. When the battery is used, the continuous operation time is ≥ 60 minutes and the lithium battery capacity is 5.0 Ah . The battery charge display function allows the battery to retain ≥ 75% after nine months of storage when the battery is fully charged .

Third, the components

SC757E2 multifunction hydraulic clamp means includes: a manual valve stellate, quick battery power source, a power switch, a handle, ventilation slots, blades, center pin, a plastic housing, the cylinder block, protective cover, LED lights . Specific distribution as shown below:

Fourth, SC757E2 heavy-duty electro-hydraulic multi-purpose pliers cutting operation

1 , the operation of the control valve

The star handle on the manual valve can make expansion arm movement (see the figure below).

2 , the tool's battery or power cord operation

( 1 ) Test run

Before the initial start-up, the battery on the rescue device must be fully charged.

step:

1 Unplug the power supply from the device body.

2 Press the release button firmly and then carefully remove the battery or power from the device.

Do not use too much force! ! !

3 Now you can use the charger to charge the battery, you can replace the power supply.

4 Insert a charged old battery or new battery until the bottom of the battery slot. If the battery or power cord is placed, it will be automatically locked.

3 , safety instructions

( 1 ) Safety instructions

The position of the obstacle must be firm before the rescue operation. Make sure that obstacles are properly supported.

All over the world, it is necessary to comply with applicable national and international regulations on safety guidance for rescue equipment. In Germany, security for statutory accident insurance ( GUV : statutory accident insurance) is mandatory.

( 2 ) Need to wear when using the device

1 Wear protective clothing

2 Wear eye protection goggles

3 Wear safety gloves

4 If you need to wear ear protection equipment

Before operating rescue equipment, make sure that no one is at risk because of equipment work or splashes. It is also necessary to avoid causing harm to the property of others or objects unrelated to the rescue.

4 , cutting operation

( 1 ) The blade must be positioned 90 ° perpendicular to the object to be cut .

( 2 ) When cutting an object, try to cut the object close to the blade root to generate the maximum shear force.

( 3 ) During the cutting process, the distance between the two blade tips must not be exceeded, otherwise the blade may break.

note!

Special care must be taken to avoid cutting high-strength parts of the vehicle body (eg side impact protection): otherwise the shear/multi-purpose pliers may be damaged!

This article was edited by China Rescue Equipment Network. Please indicate the link.

Please contact us for purchase.