The name of the FRP sump cover is known. This is the cover used on the lagoon. Is there a specific scorpion-like usage? What is the relationship between the FRP sink cover and the sink? The name of the FRP sump cover is known. This is the cover used on the lagoon. Is there a specific scorpion-like usage? What is the relationship between the FRP sink cover and the sink? Wardrobe Cabinet Handle,Thickened Solid Door Handle,Pure Copper Door Handle,Minimalist Wardrobe Invisible Handle Guangzhou Junpai Hardware Co., Ltd , https://www.gdjhfurniture.com
First of all, we must know that in the sewage treatment plant, due to engineering improvement or process needs, it is necessary to use a cover plate to close the sewage pool. Firstly, it can block the evaporation of sewage in the sewage pool and cause pollution to the surrounding environment. Secondly, it can be used by pedestrians and machines to carry out operations on the outside of the cover. Therefore, the requirements for various aspects of the FRP sump cover are also very high.
Secondly, the traditional FRP sump cover is mainly made of metal, the bottom is supported by a metal bracket, and the exterior is covered with a metal grid plate (closed), and then the entire operating platform is firmly welded. Because in the sewage treatment plant, including a large number of corrosive factors, the background is despicable, so the metal cover plate needs to be disposed of by the corresponding plating or spray paint before putting into operation. The lack of metal cover: After all, the coated or painted hand can only strengthen the metal bracket, cover and corrosion resistance in a short time. Not suitable for long-term use, and protecting the office is very cumbersome and time-consuming.
The economic benefits are poor, and some of them have been exposed to severe corrosion, and the entire operating platform must be removed. In addition to metal, is there any experience and strength that the tweezers can have a bearing that is not inferior to the metal? Although the wood board is not acceptable, although the top wood has an experienced foot bearing, the performance of the wood is uncertain and it is easy to aging. Along with this, the new composite sheet glass reinforced plastic cover is gradually put into use, and the effect is very good.
Advantages of composite FRP FRP sink plate:
1. The raw material is considered to be suitable and is made of glass fiber yarn (high toughness and strong impact resistance) and natural resin (high corrosion resistance, wear resistance and aging resistance). It has traditional metal cover and wood. Corrosion resistance, can be used for a long time in a variety of different despicable corrosive backgrounds. And according to the specific application background, select appropriate raw materials for production (natural resin varieties are not the same, acid and alkali resistance is not the same).
2. In addition to acid and alkali resistance, the FRP cover also has this high enough strength and bearing experience. Under the premise of the same size, the FRP cover is only second to the metal cover, and the quality is only about 1/5 of the metal. It is very convenient to install and cut, whether it is cut or transported.
3. Low cost and high economic efficiency.
After reading the above internal meaning, we know that the FRP sump cover is used to isolate the harmful things in the cesspool from the outside world to avoid the harm of the harmful substances in the pool and the general name of the person. Therefore, the FRP sump cover is very tight for the lagoon. If there is no FRP sump cover, then the sump will be ineffective! This article URL: http://
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Relationship between FRP sink cover and sewage pool