UL Wire And Cable Burning Test Machine Ul Wire And Cable Burning Test Machine,Wire And Cable Test Machine,Wire And Cable Burning Test Machine,Wire And Cable Flame Testing Machine Dongguan Best Instrument Technology Co., Ltd , https://www.best-tester.com
1. Pre-construction safety preparation
Road hot melt deceleration lane marking paint construction work is on the road the vehicle is driving; marking road construction line marking paint and some are flammable products, and some are toxic chemical solvents, hot melt deceleration zone crossed construction equipment belongs to mechanical. All the above aspects belong to the scope of dangerous operations. Therefore, the necessity of safe construction is indispensable. The following arrangements can be made: After arriving at the construction site, according to the road width, traffic volume, whether the traffic is open, etc. Full use of safety management tools such as signs, safety cones, and road rails, and provision of full-time traffic management personnel to manage pedestrians and vehicles to prevent accidents. The general situation is half traffic, ten applications, and if necessary, the entire road section is completely closed. All safety facilities should be clearly identified by the driver and pedestrians, as easy as possible for the passage of vehicles, ensure the safety of operators, and be adjusted at any time according to the advancement of the hot melt deceleration zone.
2. Appropriate management of road marking paint
Different hot melt deceleration zone marking construction sites should be set with different signs. Usually at the tail of the construction vehicle, “construction work is stopped at any time†and other speed limit signs, etc.; the road maintenance work site is set at the “construction in front of you to bypass (forbidden)†and the speed limit sign, etc.; diversion mark, crosswalk line For places where work is more concentrated, appropriate warning signs can be set around them. The safety cone is favored by transportation, municipal, traffic police and other departments for its bright colors, low price, light weight, and nighttime reflection. A safety cone with a certain length shall be placed on the hot melt deceleration zone underlined at the construction site to temporarily divert passing vehicles to protect the construction safety of the construction area.
What are the preparations for hot melt deceleration zone underline construction?
After more than a decade of development, road marking paint has developed from a single hot-melt road marking paint and solvent-based road marking paint to a wide range of hot melt speed-reduction belt marking paints. Paints with crossed lines all have their own characteristics and each has its own ideal application place. With the rapid development of highway construction, the amount of industry-leading hot melt deceleration zone crossed paint is rapidly increasing. So what are the preparations for hot melt deceleration zone line construction?