At present, the polycrystalline diamond PCD saw blade developed by the Yellow River Cyclone Superhard Tool Division has become the most ideal sawing tool for the furniture industry. After several years of research, development and promotion, the saw blade redefines diamond high hardness, high wear resistance, low friction coefficient, excellent thermal conductivity and small size with real processing effect and customer reputation. The characteristics of thermal expansion coefficient, high modulus of elasticity, etc., and good impact toughness of cemented carbide. Melamine veneer particle board, MDF, fire board and other plates are the highest proportion of furniture factory plates, accounting for 95%. The veneer layer is hard and brittle. It is easy to collapse when sawing, affecting the edge of the board and reducing the product grade. . Ordinary hard alloy saw blades have to be replaced once every 2 hours due to poor wear resistance. When encountering a sheet with a lot of impurities, the saw blade should be replaced in ten minutes, which seriously affects the production efficiency. At the same time, frequent replacement of the saw blade also brings trouble to the workers, increasing the labor intensity and the risk factor of the workers. The combined use cost is 10 to 15 times that of a diamond PCD saw blade. Due to the unparalleled superiority of diamond itself, the veneer sheet for cutting furniture is extremely durable, and the service life under conventional conditions can reach about 20 days. Even under difficult cutting conditions, the cutting edge is very stable, and the innovative tooth design is not easy to damage the cutting edge, which greatly improves the processing effect, enhances the stability of the process, and has a longer service life. 50 to 80 times the alloy saw blade. The Yellow River cyclone polycrystalline diamond PCD saw blade has become the most ideal sawing tool for the furniture industry. Last year, the project has applied for the identification of scientific and technological achievements in Henan Province. The replacement of the hard alloy saw blade will also become the trend of future industry development.
Recessed LED Downlight with built-in Microwave Motion Sensor
Sensor Led Down Light,Recessed Led Down Light,Led Ceiling Down Light,Smart Down Light JIANGMEN MOSCOT OPTOELECTRONIC TECHNOLOGY CO.,LTD. , https://www.sensorsled.com
led
Model
AM-6.0GY
Luminous flux
800~900lm
Luminous Efficacy
>80lm/W
Colour Rendering index
80
Beam Angle
140°
Light Decay
<30% over 10,000 hours
Rated Lifespan
>30,000 hours
Power consumption
10 watts
Input voltage / Frequency
80-260vac 50-60HZ
Reflector / Diffuser
Frosted diffuser
Operating Environment
-20°c~+50°c
Dimensions
Φ193*77mm
Hole Cut Size
Φ160~Φ180mm
LED Source
56pcs SMD2835
Working mode
ON/OFF or Full/Dim
Sensor Range
180*360 degree
Sensor Distance
6-8m Radius
Delay Time
18-25s
The Yellow River cyclone polycrystalline diamond PCD saw blade has become the ideal sawing tool for the furniture industry veneer
Abstract At present, the polycrystalline diamond PCD saw blade developed by the Yellow River Cyclone Superhard Tool Division has become the ideal sawing tool for the furniture industry. After several years of research, development and promotion, the saw blade has redefined the diamond high hardness with real processing effects and customer reputation...
Specifications