How to sew the United States how much money a square meter US grout to pay attention to what matters

The beauty of ceramic tiles is an indispensable step when we tiling, and the beauty of the tiles can be greatly improved by filling in the sizing agent. Therefore, when people are decorating, they are also more concerned with this. The following Xiao Bian will introduce to you the cost of a square meter and how to use the US grout to pay attention to what matters.

Tiles how much the United States seam a square of brick specifications have those

The price of ceramic tile seams is also divided into many types, mainly based on the size and complexity of bricks, so be sure to understand the specifications of the tiles before calculating prices. General tiles can be divided into wall tiles and floor tiles. Wall tiles We know that it is divided into two types: exterior wall tiles and interior wall tiles.

Tiles how much the United States seam a square of brick specifications comparison table:

How much is the price of a square US seam seam price

Under normal circumstances, the United States tile is also calculated according to the square of the seam, in general, from 18 to one square to 80 more than a square range. In addition, the degree of difficulty in the size of the brick will also affect the price, and the smaller the relative, the more expensive it will be.

How to sew beautiful tiles in the United States and how much money a square of US grout must pay attention to matters

How to sew a beautiful tile to the square of the use of US grout to pay attention to a

clean

First of all, you must clean up the gaps in the tiles, do it dry and dust-free, so that you can begin to fill this product.



How to sew a beautiful tile using a square of US grout to pay attention to two

Preparation before construction

It must be noted that it is not necessary to use a glue of about 40 cm long before construction. This will prevent uneven mixing of the rubber at the front end.



Tiles how much the United States seam a square of the use of US grout to pay attention to three

Rubber overtime treatment

During the construction process, if the breakage time exceeds the usable time (about 20 minutes) when the breaks are not continuously applied for more than 15 minutes, then the colloid can be injected into the mixing tube, and can be stored together with the gradually solidified mixing tube, leaving it for the next When used for a second time, replace the new mixing tube and continue to use it.

How to sew a beautiful tile to the square of the use of US grout to pay attention to four

Drying, overflow cleaning

After construction, it is necessary to pay attention to wait until the surface of the US sizing agent is slightly dry, and then remove the spilled material.



How to use a floor tile to sew the United States and how much to use it

Glue gun use

If the temperature is lower than 15 °C construction, but also that kind of high viscosity is not easy to use glue gun to play, this time can be placed in hot water (60-80 °C) soak for 10-20 minutes or with a hair dryer Evenly blowing is generally about 10 minutes or more.

Summary: how much money about the United States and the United States on the use of US grout to pay attention to what matters related content is introduced to this, as to how much it is, there is no uniform standard, not only according to the tile size, but also depends on you The level of material selected is high or low.

Kitchen Sink With Drainboard

Kitchen Sink With Drainboard,Double Bowl Double Drainboard Sink,Double Bowl Drainboard Sink,Stainless Sink With Drainboard

Guangdong Huayou Hardware Products Co.,Ltd , https://www.gudsink.com