The painter is one of the specialized work types for civil engineering. It refers to the use of hand tools or machines to apply or spray paint on the surface of buildings or the surface of doors and windows, as well as the professionals who dress up and trim the glass. What are the safety regulations that painters should pay attention to when operating ? First, for different types of paint, and related toxic materials, or flammable materials, etc., should be stored in a safe warehouse. Can not be mixed with other decoration materials. Paint is for some volatile oil, must be placed in a closed container, take a safe way of storage. Second, the warehouse where the paint is placed should be kept dry and ventilated. And for the conspicuous places, set some fire signs, ready for fire fighting equipment. In addition, the location of the warehouse should be kept within a prescribed distance from other buildings, so as to ensure the safety of relevant items and workers. Third, if the painter needs to use kerosene, gasoline, etc. to mix oil, be sure to wear protective equipment that meets the regulations and cannot smoke during the operation. Fourth, when the painter operates the spraying method indoors or inside the container, it must maintain good ventilation. Fifth, when it comes to painters operating spraying operations, it is important to remember that there are no fires around them to prevent accidents of varying degrees. Sixth, many painters are now operating electrostatic paint, and such operations need to avoid the associated static electricity condensation. Not only that, the spray booth should also guarantee a complete grounding protection device. Seventh, some outside the sash brush painting, painters should ensure that their seat belts have been fixed firmly. In addition, relevant safety nets, fences that comply with standards, and movable ladders should be set up for different downspouts or seesaw painters. Eighth, if you use a torch to paint, remember not to overfill when you are refueling. The use time of the torch cannot be too long. When the painter operates the ignition, the fire mouth should not face the relevant personnel. Latex paint construction process introduction Blank wall - brush 1 interface agent - crack treatment - leveling (including yin and yang angle to find straight) - patch - scrape 2-3 times putty - sanding - primer - looking for polishing (finding place Be sure to use a primer again on the 1st) - two coats of paint - conservation. Xiao Bian concludes: The relevant knowledge of the painter's operating procedures Xiao Bian introduced here, I hope to be helpful to everyone, if you need to know more relevant knowledge, please continue to pay attention to this site information platform, follow-up will be presented for everyone Great content. Practical and practical cut off TV wall Practical TV background wall Tatami practical Practical design of living room decoration Micro Fiber Roller Cover,Micro Plush Roller,Microfiber Roller Cover,Microfiber Paint Roller Ningbo Beilun Gelei Plastic Parts Co.,Ltd , https://www.paintwelltools.com
Practical dry goods! Science painter operation specification