Mobile Work Table,Workbench Station,Heavy Duty Workbench,Heavy Duty Rolling Workbench Changzhou Xingsheng Tianhe Electric Appliance Co., Ltd , https://www.roller-tool-cabinet.com
Air ring vacuum pump maintenance and care methods
Air-ring vacuum pump with high efficiency, low energy consumption, low noise, rugged, wide range of applications, loved by consumers, then how to maintain and maintain the air-ring vacuum pump in daily use? The following is the gas ring vacuum pump maintenance and repair methods for your reference. Air ring vacuum pump maintenance and repair methods 1, the motor is connected directly to the impeller and belongs to the high speed, the bearings need to be regularly added butter maintenance, to prevent damage (including the impeller bearings.) 2, the motor shaft power and pressure is proportional to prevent long-term Limit pressure lead to increased shaft power, motor overload, often use the pressure relief valve, it is an unloading valve, when the pressure of the air ring vacuum pump pressure exceeds the pressure set by the relief valve, the pressure relief valve on Will automatically open, the excess pressure released, so as to protect the gas ring vacuum pump motor. 3, air-ring vacuum pump inside the body more closely, the impeller and the housing clearance is small, so to filter debris and dust. For debris, usually installed in the air inlet fine filter, dust, often using a filter. It uses different filter accuracy filter elements depending on the site of use. Different filter elements have different maintenance methods and service life. When ordering, it is necessary to ask clearly. 4, in some special occasions, but also need special protection: For example, when used in a sealed environment, pay attention to ventilation cooling; when the ambient temperature (intake air temperature is relatively high), but also pay attention to ventilation and cooling, or choose to allow Intake air temperature higher ring vacuum pump. (Editor: Li Juan) Further reading: Pump and Valve Tube Fittings Exhibition Information 2016 Exhibition Information