Why is it dangerous when unattended when using gas?

When using gas, people should not leave, pay attention to the burning situation and adjust the flame. Because the soup overflows, it may ignite the flame, or when a small fire is used, the flame is blown out by the wind, and the gas continues to rise, causing explosions, fires and other accidents.

How to do a security check when you stop?

When you stop using gas or before going to sleep, you should check the switch of the gas stove to see if it is completely closed, and the gas valve should be closed.

What should I do if I find a leak?

If the smell of gas is found indoors, immediately open the door and window and check if the gas stove switch is closed. If it is closed, it may be leaking gas or gas meter. Immediately close the front valve of the gas meter and go to Outdoor calls to inform the gas company to send personnel to check. When the gas user is out of the house, the main switch before the gas meter should be turned off to ensure safety.

What safety bans should be noted when leaking?

In the event of a leak in the gas pipe, the user must immediately notify the gas company when the user cannot cut off the gas source. Before the maintenance personnel have arrived, the user should not stay indoors, and strictly prohibit the fire from entering, and do not turn on or off the lights to avoid accidents such as poisoning and explosion.

How to identify gas leaks?

Gas is an invisible and colorless gas that is invisible to the naked eye. However, the gas used by the user must be artificially scented, which has a special odor and is easily smelled. If you smell this kind of odor, you should pay attention to whether the gas leaks. When looking for a leak, use soapy water to apply the gas meter, stove and pipe connection. Any place where foaming occurs is the gas leak, but you cannot use an open flame when checking.

What are the hazards of stacking items near the gas stove?

Do not stack waste paper, plastic products, dry wood, gasoline, bamboo baskets and other easily burnt articles and other sundries around gas appliances such as gas meters, gas stoves, water heaters, etc., to prevent the ignition of unburned matchsticks after ignition of gas. Causes fire accidents and obstructs maintenance.

The role and use of gas meter switches

The gas meter switch is the gate when the cooker is inspected. It should be closed in the morning and closed at night. It is often used to avoid rust and prevent it from working when accidents occur. The method is as follows: when the switch handle is parallel to the gas pipe, the gas is turned on, and when the switch handle is perpendicular to the gas pipe, the gas is turned off.

Gas stove maintenance

It should be cleaned frequently to remove stains on the surface of the gas stove to prevent rust.

Burner fire eyes are easily blocked by rice dust, and can often be dredged with wire or old toothbrush.

The air inlet of the burner may sometimes be plugged with various kinds of debris, and it can be removed and cleared with a thick wire.

How to take the "burner": first open the pot foot, then lift the burner slightly to remove it.

How to deal with "switch tight": You can remove the stove panel, use the board surface or small hoe to align the top of the switch and tap gently, and add a little lubricant to loosen.

Gas pipeline treatment during upholstery

When encountering gas pipelines during interior decoration, you should apply for approval before moving.

Gas pipelines are easily corroded and leaky pipe fittings. Many users bury the pipelines in the walls (ground) when they are renovated, which is difficult to check and causes great damage to normal maintenance. Therefore, users are required to expose the gas pipe to the room during decoration so as to timely treat the leakage and ensure safe use of gas.