Many people will make a glass partition during the renovation. The glass partition will make the home improvement a step up. However, the glass partition has the disadvantage that the glass partition plaster layer always shows cracks, and there is also no partition installation. Secure, so why does this happen? How can I solve it? 1. A small piece of aerated concrete block above the mouth is embedded after the two plates are installed. The cement paste on both sides of the slat is impinged by the aerated concrete block, so that the binding mortar between the plate joints is not full. After the gray, it is easy to produce cracks here. 2. Because the plastering treatment is uneven, the thickness of the ash layer is uneven and the thickness difference is large. During the drying and hardening process of the mortar, an unequal amount of shrinkage occurs and cracks appear. 3, due to poor planning or construction of the wrong order, after the completion of plastering through the wall and need to drill holes, wall due to severe shock and vibration and produce irregular cracks. Since glass partitions are prone to this situation, special attention is paid to the maintenance of the partitions during the installation and maintenance. 1, the correct use of clean partition material, taboo some high-strength, acid and alkali corrosion liquid damage to the glass surface. 2. During the installation process, it is forbidden to sway freely and the sharp objects of the heavy object may collide to prevent the glass from sliding off. 3, the glass partition should be away from flammable objects, while ensuring the regular cleaning of the partition surface, so that your partition shows a clean, comfortable atmosphere. To avoid cracks in the partitions, in the final analysis, starting from the quality of materials and selecting materials with reliable quality can help you save a lot of time. At the same time, you pay more attention to the cleanliness and maintenance of materials, then the glass partition can be used for a long time. Tips: More practical decoration knowledge, real scene with the shoot, please pay attention to the palm of this site (micro signal: mall_jia). Partition glass partition Brass fasteners are used for their physical and aesthetic properties. Brass is utilized due to its high thermal conductivity and corrosion resistant properties, it is suitable for use in hot and cold environments, and resistant to water corrosion, making it a staple of industries such as heating and plumbing. Brass fasteners are largely non-magnetic (like any fastener, slight magnetic properties can develop during the manufacturing process) and resistant to tarnishing. Brass Nut,Adjustable Brass Nut,Brass Strat Nut,Brass Cap Nut Taizhou Hongchuang Hardware Co., Ltd. , https://www.taizhouhongchuang.com
Causes of cracks 
 How to avoid cracks 
Brass fasteners are suited for some marine environments, including brackish water and slow current sea water; brass in this environment develops a protective green coating. Brass fasteners are also commonly used with wood applications, as the golden coloring blends well with the tan wood. Brass is a softer metal and must be used with care, always drilling pilot holes and using driver bits that fit the head of the screw precisely to prevent stripping. Brass Bolts also require a pilot hole be driven before installtion.
What about cracks in the glass partition?