Steel furniture installation process specification

Jc001.load('iframe') JIFrame.create({ 'url' : '/go.php?action=ads&iframeHeight=250&isIframe=1&key=%BC%D2%BE%DF&pos_id=jc001_news_detail_30&reqkey=1&style=margin%3A15px+15px+ 25px+0%3B+height%3A255px%3Bwidth%3A255px%3B+float%3Aleft%3B', 'height' : 250 })

Steel furniture installation process specification

1 Scope

This specification specifies the pre-construction, personnel, process requirements, process and inspection of ship steel furniture.

This specification applies to the installation of steel furniture for all types of ships.

2 Terms and definitions

2.1 Floor-standing steel furniture Floor-standing steel furniture is a piece of furniture that is bolted or welded to the deck or base.

2.2 Wall-mounted steel furniture Wall-mounted steel furniture is made of bolts, self-tapping screws or welded type fixed on the surrounding wall.

2.3 Ceiling-type steel furniture Ceiling-type steel furniture is a piece of furniture that is hung on the top of the cabin by welding and bolting.

3 Preparation before construction 3.1 Technical data Before construction, first read the steel furniture layout and tray table carefully, and if necessary, make technical submissions.

3.2 Before the construction of materials and materials, it is necessary to know whether there is a shortage of steel furniture and whether the supporting accessories are in short supply. Steel furniture must pass the quality inspection before entering the factory and should have a product certificate. Products that do not meet the quality inspection approval are not allowed to be installed on board.

3.3 Construction tools Before construction, all construction tools: ruler, stone pen, elastic box, square ruler, grinding machine, welding cutting tool, steamed bread, etc. should be prepared.

4 people

4.1 Before the construction personnel are employed, they should carry out the knowledge of professional knowledge and safety production knowledge, and should be trained. Only after passing the examination can they be put into operation.

4.2 Before the electric welder is on duty, he should carry out the knowledge of professional knowledge and safety production knowledge, should be trained, and pass the examination and meet the third-level qualification of electric welder before he can be put into operation. When the welder is on duty, he must wear a special work permit.  

200*1200mm Wood Look Tiles

The 200*1200mm wood look porcelain tile completely collects and restores the texture of natural wood through 3D digital printing technology. It is natural and realistic. It seems to enjoy the natural log charm.it is like feeling the tenacity and enthusiasm after thousands of years by touching its surface.The advantage of this Wooden Tiles is as following:

200x1200mm Wood Look Tiles

1.Lower water absorption and real wood texture.
2.Imported spanish galzed material to make sure the high quality of the goods.
3.Waterproof,wear resistant and easy to clean.

Wooden tiles wall,Wooden tiles exterior,Wooden tiles design for floor,Wooden tiles bathroom floor,Wood effect tiles

Foshan Castel IMP&EXP Co.,Ltd , https://www.fscastel.com