Shear Beam Load Cells are widely used where operators need to measure compressive forces. The core component of a shear beam load cell is a spring element. This element is a piece of metal that is elastically deformed under load and recovers the moment the load is removed.
The (single-ended) shear beam is designed for low profile scale and process applications. The shear beam capacities are from 100kg to 50t. One end of the shear beam contains the mounting holes while the opposite end is where the cell is loaded. The load cell should be mounted on a flat smooth surface with high-strength hardened bolts. The larger shear beam cells have more than two mounting holes to accommodate extra bolts to keep the hardware from stretching under stress load.
ELET torque tester: the difference between the new and the old models
The difference between the new and old models of the ELET brand torque tester:
(1) The new model is a button type, and the old model is a finger-switch type. The new machine is more beautiful than the old model.
(2) The new model can set the upper and lower limit alarms according to actual needs; the old models will only alarm if they exceed the maximum test range.
(3) The new torque tester can be set to zero automatically after 1, 2, 5 seconds; the old torque tester cannot be automatically reset to zero.
(4) The new torque tester can find the average of 10 sets of data, and can display the maximum, average and minimum values ​​of the 0 sets of measured data. Older torque testers cannot be averaged.
(5) The new torque tester can be equipped with the torque monitoring software to connect the computer. The old torque tester cannot be connected to the computer.
(6) Software, software is divided into four main interfaces:
1 Synchronize with the LCD of the torque tester and record the maximum value;
2 The torque of the measured object can be reflected by the wave curve, which is intuitive and clear;
3 Unrestricted recording of the tracking torque, positive maximum torque, and reverse maximum torque of the measured object. Test data can be exported and saved in Excel file format. At the same time, the test report can be printed, and the average of 10 sets of test data is automatically obtained in the printed test report.
4 You can set the serial port number of the connected computer and modify the operation password.
The above materials are provided by Dongguan Changan Key Electronics Factory (original). Miss Mo 0769-85492889
Load Cell Central,Shear Beam Load Cells,Larger Shear Beam Cells,Load Cell Measure Compressive Forces
Zhejiang Nanhua Electronic Technology Co., Ltd , https://www.nhloadcells.com