Manual, automatic and semi-automatic machines,Machine suitable for all workpiece sizes and requirements,Floor stand and table top machines,Fast and accurate cutting requires carefully developed equipment and consumables. We offer a complete range of cutting machines, gripper tools and cutting wheels, all designed to ensure convenient, efficient and deformation-free cutting for a wide range of workpiece sizes. Automatic Cutting Machine,Auto Cutting Machine,Automated Cutting Machine,Semi Automatic Cutting Machine TROJAN (Suzhou) Technology Co., Ltd. , https://www.trojanmaterials.com
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge>Four ways to teach you how to deal with bearing damage Four ways to teach you how to deal with bearing damage
Bearings are attributed to fine parts; therefore, the demand is quite stable when used; that is, the use of high-function thrust ball bearings; if not used properly; can not reach the expected function; and simply damage the bearings. Thus; Eastern Hemisphere Hardware Net professionals advocate the use of bearings should focus on the following: /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
Usually grease is smooth; does not remove the bearing; directly fills the smooth grease. When the oil is smooth; usually does not need to be removed; however; for instruments or high-speed bearings, etc.; to be cleaned with clean oil; remove the rust inhibitor applied to the bearing . Remove the bearing of the rust inhibitor; easy to rust; so can not be placed at will.
First, the use of the device should be carefully and carefully not allowed to force the stamping; the hammer is not allowed to directly hit the bearing; the pressure is not allowed to pass through the roll.
Second, use appropriate and precise devices to try to use special things; try to avoid the use of cloth and short fibers and the like.
Third, to avoid the corrosion of the bearing directly when taking the bearing by hand; to wash away the sweat on the hand; and apply high-quality mineral oil before operation; especially in the dry season and summer to pay attention to rust.
Fourth, adhere to the bearing and its surrounding environment, even if the invisible shallow dust enters the thrust ball bearing; it will also add bearing wear; oscillation and noise.
Recommend to friends comments close window Bearing related knowledge Explain in detail the removal and repair of the bearing. The characteristics of the main bearing oil and the common terms and definitions of using the bearing (11)
The factors affecting the service life of SKF bearings are the analysis and transformation of the bearing problems of medium-sized motors (1)
This article links to http://
Please indicate the bearing network http://
Previous:Strategy in response to "IKO bearing presents operational problems" Next: NTN develops resource-saving lightweight wheel bearings
Four ways to teach you how to deal with bearing damage
Source: China Bearing Network Time: 2013-12-12