Gold hemp is a commonly used one in granite stone. This granite structure is dense, hard, acid and alkali resistant, and has good weather resistance. It can be used outdoors for a long time. However, during use, due to water immersion, oxidation and other reasons, gold sesame may appear rust spots, affecting the decorative effect. So what should I do with this rust? 1. Try to avoid the use of acidic detergent to directly clean the rust spots on the stone surface. Because some acidic detergents simply redox the rust spots, the redox iron ions are still unstable and easy to re-air with the air. Oxidation of water and oxygen regenerates rust, gold and granite and further enlarges the area of ​​rust with the flow of acidic solution. This is why the rust spots are removed more and more when using an acidic cleaner to remove rust. 2. When using rust remover, it is necessary to choose the products of the manufacturers with good reputation and good quality. A good rust remover, in addition to the acid component, is also provided with an appropriate amount of additives to maintain the stability of the iron ions in the redox reaction. Gold granitic granite granite with this rust remover treated rust is not treated, and its effect can be maintained for a long time. 3. Since the basic chemical composition of marble and granite is not the same, the main component of marble is calcium carbonate, which is alkaline; the main component of granite is silica, which is acidic. Therefore, when selecting the rust remover, the gold granulated granite must distinguish the marble rust remover and the granite rust remover. The granite rust remover must not be used for the marble rust spot treatment. The marble rust remover cannot be used for granite. The rust spots are treated. 4. When the surface of the stone is treated with rust spots, the gold ramie granite only needs to be coated with a rust remover on the surface of the stone. Gold-gumstone granite can also be treated by surface grinding and polishing; the treatment of deep rust spots is relatively complicated, requiring a certain amount of dosage and reaction time, and sometimes it needs to be reused.
Pole Anchors are anchor holder, steel holders or post holers, are used for holding or fixing the wood stakes to keep it straight and bot being destroyed. The material of the holders is low carbon material , thickness is usually 2mm to 5mm, surface treatment is galvanized or powder coated. There are many types of holder in our shop. common spikes, TT holders, U holders, adjustable anchors , screw anchors and etc.
We have gotten CE certificate on the holders, we can make sure of good quality of the anchors. Please shop easily on ours.
Pole Anchor,Screw Pole Anchor,Steel Pole Anchor,Ground Pole Anchor Huanghua Yuanfeng Hardware Products Co.,Ltd , http://www.yuanfenghw.com
How to deal with granite stone rust spots