Autoclavable and Universally Compatible PCR Tubes 0.2 ml PCR Tubes,PCR Tube Volume,Sterile PCR Tubes,PCR Test Tube,Real Time PCR Tube Yong Yue Medical Technology(Kunshan) Co.,Ltd , https://www.yonyuemedical.com
Ensuring efficient and uniform heat transfer becomes a lot easier with our range of PCR tubes. Thanks to our advanced molding technology, Yongyue Medical can offer you high-quality and uniformly thin-wall PCR tubes at the most competitive prices.
These sterile PCR tubes come with a leakage-proof snap-cap. It allows you to prevent evaporation during the reaction, ensuring accurate results. We use only virgin polypropylene to manufacture the following types of PCR strip tubes.
Types of PCR Reaction Tubes We Offer:
More info about PCR Tubes:
What Are PCR Tubes?
PCR tubes are small tubes made of high-quality virgin polypropylene with a conical bottom. They have uniform thin walls to facilitate efficient heat transfer to the sample. These tubes are autoclavable and work well with most thermal cyclers.
What Are the Applications of PCR Tubes?
The most common application of PCR tubes includes various molecular biology biochemistry experiments requiring real-time PCR (Polymerase Chain Reaction). As these tubes have ultra-thin walls, they are perfect for accurate and steady thermal transfer in an array of thermocyclers. Our thin-wall PCR tubes meet the protocols required for PCR, qPCR, reverse transcriptions, and a variety of other applications.
Vacuum pump routine maintenance and repair
In view of the problems that occur during the use of the vacuum pump, the following summarizes the routine maintenance and maintenance knowledge of the vacuum pump at fifteen points: 1. Inspect the vacuum pump pipe and the joints for looseness. Rotate the vacuum pump by hand to see if the vacuum pump is flexible. 2. Add bearing lubricating oil to the bearing body, observe the oil level should be at the center line of the oil, the lubricating oil should be replaced or replenished promptly. 3. Unscrew the diversion plug of the vacuum pump, pouring water or slurrying. 4. Close the outlet valve and outlet pressure gauge and import vacuum gauge. 5. Jog the motor to see if the motor is turning correctly. 6. Start the motor, when the vacuum pump is running, open the outlet pressure gauge and the inlet vacuum pump, as it shows the appropriate pressure, and gradually open the gate valve, while checking the motor load conditions. 7. Try to control the vacuum pump flow and lift the range indicated on the sign to ensure that the vacuum pump at the highest efficiency point of operation, in order to get the maximum energy-saving effect. 8. Vacuum pump in operation, the bearing temperature can not exceed the ambient temperature 35 ℃, the maximum temperature shall not exceed 80 ℃. 9. If the vacuum pump is found abnormal sound should stop immediately check the reasons. 10. To stop using the vacuum pump, close the gate valve, pressure gauge, and then stop the motor. 11. Vacuum pump in the first month of work, after 100 hours to replace the oil, after every 500 hours, oil change time. 12. Regularly adjust the packing gland, to ensure that the drip chamber filler normally drip out into the room as appropriate. 13. Check the wear and tear of the shaft sleeve regularly, should be promptly replaced after larger wear. 14. Vacuum pump in winter season, after parking, you need to unscrew the lower part of the drain plug to drain the media to the net. Prevent cracking. 15. Long-term deactivation of the vacuum pump, the pump required to open all, dry the water, the rotating parts and joints coated with grease installed, safekeeping.