Floor heating into the popular 4 is the key to purchase

With the increasing popularity of ground radiant heating (abbreviated as "floor heating"), floors suitable for floor heating systems ("floor heating floors") have also received increasing attention. So how do you choose to warm the floor? In addition to meeting the general floor quality indicators, floor heating floors must meet four major characteristics.

Brand shop: Germany Korno Rhine sunshine

First, good thermal conductivity and heat dissipation.

Both wood and bamboo are good natural materials. The ground heat is transmitted to the surface through the floor and there is bound to be heat loss. The ideal floor can minimize these losses. Therefore, in order to reduce the loss of thermal energy and reduce heating operation and maintenance expenses, the principle of floor heating selection is “should not be thick enough”. Optional multi-layer solid wood, bamboo flooring and laminate flooring, the thickness of not more than 8 mm, the maximum can not exceed 10 mm.

Second, the material stability is good.

The use environment of floor heating floor is complicated, especially in the northern area, the ground in the heating season is subject to various kinds of moisture, and the temperature of the ground when heating is increased suddenly, the floor will inevitably bear the double change of “temperature” and “humidity”. Therefore, when choosing floor heating, we must choose those floorings with good material stability, such as laminate flooring, multi-layer solid wood flooring, and bamboo-wood flooring.

Third, good moisture resistance and heat resistance.

Integrated composite flooring is inseparable from adhesives. Adhesives must meet the three major indicators of environmental protection, good bonding strength, and high temperature and humidity resistance. For floors that are floor-heated, we must especially experiment with high humidity resistance and low temperature resistance. If ordinary adhesives are used, environmental indicators, moisture resistance, aging resistance, and expansion rate cannot meet the standards. Therefore, when a consumer purchases, it is necessary to check the product report and inspection report of the merchant.

Fourth, good wear resistance.

Floor heating should not be thick, so the composite surface layer is generally 0.3 mm to 0.6 mm. The main surface of the paint wear resistance than traditional indicators.

Warm floors are not thicker and warmer. According to industry sources, the floors that are more suitable for geothermal heating methods should be laminate flooring and solid wood composite flooring.

In the market, most merchants claim that their floors can be used in floor heating systems. However, according to experts, 55% of these floors cannot be used in heating systems; 25% can be used for floor heating, but the effect is not ideal; only 20% is dedicated floor heating. Therefore, experts advise consumers that they must be more careful about certain misleading claims. For example, the thicker the wooden floor is, the better the foot feels, and the thicker the insulation is; the special floor heating pad has a foam pad on the back; on the aluminum foil packaging box It is the geothermal floor that is printed with "heating room only." As everyone knows, these arguments are unreasonable. They only affect the quality of the body's "cool feet and cool head." In addition, because the floor is good or bad depending on the quality of the floor itself, but also depends on the degree of specification during the installation process, it is best to provide professional installation services by the manufacturer, to avoid the installation team to install.

Recommended Link: Picking laminate flooring "Four to four Don't remind you"

Recommended Links: Summer Decoration Wood Flooring Common Defects

Floor heating paint

Liquid Reservoir

4 Channel Reagent Reservoirs,8 Channel Reagent Reservoirs,12 Channel Reagent Reservoirs,96 Well Reservoir,384 Well Reservoir, from Yongyue Medical, is made of strong clear polypropylene (PP). Low profile designation which is suitable for small volume robotic tips used in high flux instruments. In the automatic pipetting process, the reservoir can perfectly overcome the surface tension of the liquid and minimize residual liquid

Our Reservoir Plates are perfect for storing volumes of samples to be pipetted into other microplates for further applications.
These plates are manufactured in cleanroom facilities which are certified free of RNase, DNase, human genomic DNA and endotoxins. We use only the highest medical grade virgin polypropylene with high resistance against chemicals such as DMSO, phenol, and chloroform. Pyramid channel bases are best for small volume recovery. The standard SBS footprint ensures its compatibility with automation.
Our sturdy and reusable reagent reservoirs can stand-up to autoclaving, exposure to temperature extremes, and chemicals. Made from polypropylene these reservoirs offer a stable base that makes them suitable for manual procedures as-well-as automation.
These fully automation compatible reservoirs feature an SBS footprint and can be used in plate handlers or stackers. To minimize space on platforms (when a stacker is not in use) or under hoods, these reservoirs can be filled and stacked.

96 Well Reservoir,Reagent Reservoir,Reservoir Plate,12 Channel Reservoir,8 Channel Reservoir,384 Well Reservoir

Yong Yue Medical Technology(Kunshan) Co.,Ltd , https://www.yongyuelab.com