The 800W Circular Saw is Perfect for Cutting Wood, especially on Bevel Cutting and Straight Cutting, compared to the Jig Saw.
It is a wood cutting power tools that users feels much better, compared to jig saw.
The Wood Working Power Saw with single speed 4000rpm, Bevel Cutting 45°, 45mm cutting depth at 90 Degree.
The 140mm Circular Saw With a dust blower for max cut -line visibility.
The Electric Wood Cutting Power Tools with protection button for your safety, soft rubber handle for comfortable use.
800W 140Mm Circular Saw,Circular Saw 800W,Electric Circular Saw For Wood,140mm 800w Circular Saw With Electronic Brake Ningbo Brace Power Tools Co., Ltd , https://www.bracepowertools.com
Troubleshooting pump failure
When the pump due to work disorders or a variety of failures require maintenance, the operation is as follows: General inspection a, check the pump for mechanical damage, pump and motor casing is severely corrosive damage, disconnect the cable connector disconnect; b, unloading Remove the record assembly, remove the vanes and jet from the pump assembly in sequence, check the flow path and the pump chamber for fiber and other deposits , The impeller lock nut is not loose off, 0 rubber map with or without decoupling. c, manual rotation of the impeller, check the outer edge of the impeller jump and radial runout, if the larger beating, the impeller or motor shaft extension to be straightened. d, loosen and remove the impeller lock nut, use a flat-blade screwdriver or flat-faced pallets to stop the motor shaft hood stretch, loosen pine and remove the impeller, remove the mechanical seal moving block, the static block can be removed together with the pump head lining , Check the static and dynamic block surface for wear and tear, scratch> elastic body deformation and wear and tear and so on. Pump assembly to wipe clean all parts, mechanical seal static and dynamic block with a clean and soft cloth with a clean surface, the operation steps in accordance with the demolition of reverse order.