Bathroom products continue to break through or will usher in a market change

Due to differences in production technologies and water-saving design technologies, the market for water-saving products is not clean, although some businesses have indicated that their products are water-saving products, especially sanitary ware, which still require repeated flushing when used, and the actual water consumption is huge.

The continuous development of the sanitary industry, sanitary ware companies are constantly upgrading themselves, bathroom products continue to break through, a wide variety of water-saving bathroom products are blooming, but consumers feel it is difficult to buy, "usually look at the brand, and then Listen to shopping guides, there is no professional knowledge, nor do you understand," Ms Zhang told the author.

It is not difficult to see that although the current water-saving sanitary ware and sanitary ware have become the mainstream of the market, consumer attitudes toward consumption have not been entirely guided by water conservation, but have focused more on price and appearance. Faenza sanitary ware said that with the increase in water prices, water-saving products will undoubtedly usher in a peak market period, but the current water-saving product market, water-saving products have uneven water-saving performance, easy to bring to consumers Troubled.

At present, 3/6 liters of double-button dual flush sanitary ware is the mainstream product for consumers to purchase. The 3/6 litre sanitary ware flushing method is mostly flush type, and some consumers will try 4.8 litres and 4.5 liters of “super water saving”. "Sanitary ware, these types of sanitary ware use siphon-type or siphon jet flushing, the intensity of flushing is greater, the jetting ability is farther, and the noise is relatively small, but the price is slightly higher than some flush-type sanitary ware.

In addition to water-saving sanitary ware, some faucets are also designed to reduce the actual water flow of the faucets by increasing the resistance and foaming devices, without sacrificing the feel of the water flow and saving water. In the past, the use of more common sensor faucets in public places began to prevail in the market. However, due to the uneven level of production of domestic water-saving products, the performance of water-saving products varies greatly.

Due to differences in production technologies and water-saving design technologies, the market for water-saving products is not clean, although some businesses have indicated that their products are water-saving products, especially sanitary ware, which still require repeated flushing when used, and the actual water consumption is huge. Ma Xiaogang, a marketing director of a ceramic company, told the author that whether water-saving sanitary ware really needs to be designed and developed in terms of ceramic glaze, flushing capacity, and water consumption control.

Ma Xiaogang said that some enterprises with insufficient technology and financial resources have difficulties in investing in water-saving products and technological problems, resulting in a glazed surface that is not smooth enough, can easily catch dirt, and is prone to mold, and improper internal design can also lead to The flushing capacity of sanitary wares is insufficient, and the one-off flush rate is greatly reduced. Water flushing must be repeated. Some 6 liters or 3/6 liters of sanitary wares seem to meet the national water saving requirements, but “partial flushing rate of 6 liters of sanitary wares Low, need to be washed again, which will consume 12 liters of water or even more, more waste than the original non-water-saving products.”

In addition, the author also found that some shopping malls, some thousand yuan less than the sanitary ware is also known as "well water-saving performance is good," Fang Chun, general manager of a brand bathroom division, said that the current water-saving sanitary ware factory is not mandatory water-saving testing, The price cannot be the sole criterion for judging the water-saving performance of sanitary ware. “But some extremely exaggerated sanitary ware with only 2 or 3 litres of water is not reliable. This rinsing force of the sanitary ware is difficult to reach the requirements of 12.5 meters, and it is easy to cause problems such as clogging. ". Therefore, when buying sanitary products, we must pay attention to the quality of the bathroom.