Cab Parts
We take the time to examine each assembly for operational requirements and collect the engineering to construct Excavator Cab specific functional test systems.This enables us to diagnose, repair, test, and validate each item in order to demonstrate that the problem(s) has been resolved.
China Cabin For Excavator,Excavator Cab manufacturer, choose the high quality Excavator Cabin,Digger Cab, etc.
We are a professional manufacturer of hydraulic accessories for crawler excavators Professionally provided aftermarket customers with various brands of crawler Excavator Final Drive, Travel Motor , Travel Gearbox, Swing Device , Swing Motor ,Swing Gearbox,hydraulic pump, main Control Valve and other accessories.Strictly controlling the quality acceptance of each product Standards to ensure high-quality qualified export of each product.At the same time, we can customize the production services of the products through the drawings according to customer needs, and make every effort to make the perfect product in the mind of each customer.
If you want to know more about our products in more detail, please click on the product details to see more information about product quality, price, packaging, transportation, etc., or you can directly click on Contact Now on the page to talk to us directly. Looking forward to starting long-term business cooperation with you!
1: When will ship my order ?
Cabin For Excavator,Excavator Cab,Excavator Cabin,Digger Cab Jining Juheng Hydraulic Machinery Co., Ltd. , https://www.jhexcavator.com
Save raw materials (the amount of silver required is only about 4% of the original cyanide bright silver plating).
1 Experimental methods and results discussion
1.1 Electrodes and Experimental Conditions
Anode: stainless steel plate 10 × 2cm2;
Cathode: copper piece (a number) 10 × 2cm2;
Temperature: No stirring at room temperature.
1.2 Process flow
Electroplating degreasing→hot water washing→cold water washing→chemical derusting→water washing→cyanide top copper plating→water washing→acid bright copper plating→washing→bright nickel plating→washing→impact silver plating→deionized water (or distilled water)→ Passivation → Immersion 400 Organic Film → Drying → Dipping Light Protective Film → Drying → Inspection.
1.3 Electrolyte
The silver plating electrolyte includes AgCN and KCN electrolytes. Therefore, the content of AgCN and KCN has a great influence on the impact plating method. The amount of fixed AgCN used in the experiment was 1.5 g/L. The content of KCN in the electrolyte was changed to determine the proper ratio of AgCN and KCN. It can be seen from Table 1 that the content of KCN in the electrolyte is 80 g/L, that is, the ratio with AgCN is 160:3. At this time, the silver plating is bright and detailed, the appearance is ideal white, and the content of KCN is low. At this content, the coating layer is formed into a mist so that the silver plating layer is blurred, the gloss is insufficient, and the crystallization of the plating layer is not fine. If it is higher than this content, the plating layer becomes yellow.
This ratio relationship between AgCN and KCN is maintained because the main components of the impact silver plating electrolyte are complex silver salts and free potassium cyanide. The formation reaction of the complex silver salt is as follows: AgCN+KCN=K[Ag(CN)2]; disassociation reaction of the complex silver salt: K[Ag(CN)2]=K++[Ag(CN)2]-
Since the unstable constant of [Ag(CN)2]- is very small (K instability = 8 x 10-22), the concentration of Ag in the electrolyte is very low, so the deposition of the silver layer on the workpiece is mainly [Ag(CN)] 2] - The direct reduction.
Potassium cyanide acts as a complexing agent in the electrolyte and complexes with silver to form [Ag(CN)2]-. Due to its strong complexing ability, the stability of the cyanamide ion is good. Keeping a certain amount of potassium cyanide free in the electrolyte can ensure the stability of the [Ag(CN)2]-complex ion, increase the role of cathode polarization, and make the coating uniform and detailed.
If the content of AgCN in the electrolyte is too high, the yellowing of the coating will be caused. If the content is too low, the complexation of silver ions with potassium cyanide will be unstable, the cathode polarization will be small, and the coating will not be detailed. On the basis of a large amount of experiments, this method can determine the requirement of impact plating when the content of AgCN is 1.5 g/L, which saves the amount of silver and meets the requirements of decorative silver plating.
Table 4 Effect of Other Conditions on Plating Appearance
Plating phenomenon
cause
Solution
Yellow
Electroplating solution contains organic impurities and sulfur; AgCN content is too low; KCN content is too high
Low KCN content; high current density
Treated with activated carbon; supplemented with AgCN; adjusted KCN content
Supplement KCN; appropriately reduce the current density
White fog, hair paste, lack of gloss
Low KCN content; organic magazine accumulation
Add KCN; activated carbon filter
From the skin, coating scorch, hair flower
Poor cleaning before plating; too high current density; incomplete degreasing; organic impurities before plating; unactivated before plating
Improve pretreatment; Reduce current density; Strengthen degreasing before plating; Treat with activated carbon;
1.4 Effect of Current Density on the Appearance of Plating
The experiments were carried out with impact plating at different current densities (see Table 2). Experiments have shown that the current density is too large to cause the coating to peel and scorch, the coating is dark, and the crystal of the coating is thick; the current density is too small to reach the effect of impact plating, and the required time is long enough to have an effect; reasonable current density is 5.0 ~6.0A/dm2; The experiment also shows that with the plating solution in the AgCN and KCN content of different current density should be appropriate changes, the general KCN content increases, the current density is also appropriate to increase.
Table 1 Effect of KCN content on the appearance of silver plated layer
KCN content (g/L)
Plating appearance phenomenon
25
Coating is dull and dull
55
Plating is lack of haze gloss
80
Plating white and fine
135
Most of the white light coating is locally yellowish
175
Plating yellow rough matt
1.5 Effect of Plating Time on Plating Appearance
Compare plating effects at different times and seek the best time for impact silver plating. Impact plating time is not easy to be too long, 7 ~ 9 seconds is appropriate, and because of the different size of plating parts, the impact plating time should be slightly different, plating parts can be more red plating 2 ~ 3 seconds, plating can be small Less flush plating for 2 to 3 seconds. If the impact time is too long, it will cause the coating to be hazy. Although white but not bright, the time is too short, the coating has no obvious phenomenon, and the appearance is dark, which is mainly due to the non-uniform plating, which does not completely cover the nickel underlayer.
1.6 The effect of temperature on the appearance of the coating
The impact plating experiments at different temperatures are used: if the temperature of the electrolyte is properly increased, the cathode current density can be correspondingly increased and the deposition rate can be increased. However, the temperature is too high, it will speed up the evaporation of the electrolyte, emit toxic gases, so that the electrolyte instability, generally can be operated at room temperature, without heating nor without stirring (see Table 3).
Table 2 Effect of current density on the apparent appearance of silver plated layer
DX (A/dm2)
Plating appearance phenomenon
2.0
No phenomenon
4.0
Small bubbles, uneven
5.0
Uniform bubble, smoother speed, bright
6.0
Uniform bubble, smooth speed, bright
9.0
Bubbles are too fast, matt
10.0
Dramatic air bubble, scorched
1.7 Discussion of Other Influence Conditions (See Table 4)
Table 3 Effect of Temperature on Plating Appearance
T(°C)
Plating appearance phenomenon
25
Bai Liang
35
Bai Liang
40
Bai Liang
55
White uneven brightness
65
Some yellow and matt
2 process recipe
Based on the above experiments, the process recipe for impact silver plating was obtained. Decorative silver plating formula is as follows: AgCN (g / L) 1.5-3; KCN (g / L) 80-160; T (°C room temperature; T (s) 5-11; DK (A / dm2) 5.0 ~ 6.0; Voltage (V) 3-4.
Through experiments, it can be seen that the impact silver plating process has the following advantages: short cycle time, greatly improved production efficiency, easy and easy operation of electroplating, reduced operating procedures, raw material savings, and electrolytes used for electroplating only in both AgCN and KCN, and the finished product is bright and wear-resistant and corrosion-resistant. With strong anti-discoloration ability. Finished products reach the decorative requirements, and can be applied to large-scale production. This method is applied to electroplating of ornaments and jewelry and has strong practicality.
references
[1] Zhang Dachang Plating and Protection [M]
[2] Wu Shuangcheng Plating and Environmental Protection [M]
[3] Shen Shunbao Surface Technology [M]
Silver plating process research
Silver, a precious metal with a long history of application, contains a small amount in the earth's crust, accounting for only 0.07ppm. Pure silver is a beautiful silver-white metal. Its jewelry and utensils have good reflectivity. After polishing, it can be polished. Achieve a very high brightness, which is widely used in jewelry and home decoration. The plating of some silver on some metal surfaces can also achieve the decorative effect of pure silver. The appearance is bright and detailed, and it is wear-resistant, corrosion-resistant, and has strong discoloration resistance, so it has a wide range of applications. The previously used non-bright silver plating process has poor appearance, low anti-corrosion force, and particularly poor ability to resist sulfur and discoloration. In order to emit light, chemical polishing or copper brushing and reimmersion silver are usually used, which wastes electricity and time. And pollute the environment. In order to solve the above problems, two methods are commonly used in the country. One is to use a bismuth potassium tartrate with organic additives (mostly sulphur compounds) to obtain a bright silver plating layer. This method makes the coating easily discolored and brittle due to the effects of antimony and sulfur. Large, solderability is not ideal. The other is the use of cyanide bright silver plating, this method uses a sulfur-free organic brightener and the appropriate amount of potassium antimony tartrate in combination to obtain a bright silver layer, to solve the coating is easy to change color, brittle, can be welded The problem of unsatisfactory sexuality, while reducing the consumption of raw materials. However, due to the large number of organic complexes required in this method, the number of factors influencing electroplating increases, and the number of processes increases. In order to find a way to save time and labor and materials, a reform was made on the basis of the original process, and an impact silver plating process was recommended. That is, at a higher current density, silver plating and silver layers were completed in a few seconds. Thin and uniform light, the composition of the electroplating solution is simple, no other organic ingredients are needed, the process is completed once, the time is short, and the production efficiency is high.
Once we get confirmation of payment, we will try the best to ship order within 24 hours
2: How long to prepared the goods?
We have many stock for each iterm. so dont woride .we have enought stock for u
3: Which shipment you can supply?
By sea, by air or by express (DHL, FEDEX ,TNT,UPS,EMS)
4.How long does it take to clients address ?
The normal delivery time is 4-5 days .depending one which country u are in
5.How can i know my order it already shipping ?
When the goods shipping , i will email u for tracking number for goods. if by sea or by air , i can offer bill of lading to u
6.If i was not satisfied with the products, can i return goods ?
Yes . we offer exchanged and repair serve in the warranty time . please contact us before u return