Compression packaging machine Sadao compression packaging machine product introduction A compression packaging machine is a packaging machine that reduces the volume of a fluffy (soft) article. Someone in the market is called true Empty compressors, compression sealers, compressors, strictly speaking, compression and packaging machines. The compressed items are flat and beautiful. Moisture-proof and dustproof, reducing storage and transportation costs. It is a packaging machinery for many export enterprises, especially home textile products. The ideal packaging equipment for foam manufacturers such as sponge products. How does the Sadao compression packaging machine work? 　　　 1. The common market is divided into three types: (1) Hydraulic compressor , which uses hydraulic oil to transfer the pressure device working in the hydraulic cylinder. (2) Pneumatic compressors , which use compressed air to transfer the pressure device working on the cylinder. (3) The mechanical screw and the motor are composed of the pressure device that uses the rotation of the motor to transmit the working of the screw. Use strong mechanical pressure to squeeze most of the air inside the package and compress it to a certain thickness. The bag is sealed. It has been reduced to a size of more than 1/3 or even smaller. Sadao pneumatic compression packaging machine operating instructions 1. Turn on the power ~ 220 V / 50Hz , turn on the power switch, and the power indicator lights. Turn on the air supply, with air pressure : 0.8 M Pa , with a gas volume: 0.25 cubic meters / minute. 2. All pneumatic components and cylinder speed inside the machine are adjusted by the factory, it is best not to adjust, such as It needs to be adjusted and should be operated under the correct guidance of professional technicians. 3. When the operation starts the compression (manual) green button switch, the cylinder moves and the pressure plate slowly compresses downward. To be pressed When the cylinder cannot be pressed down, step on the foot switch, the sealing cylinder will work, and also press down, after heating time and After the cooling time, the compression cylinder and the sealing cylinder are restored, and the entire operation is completed. 4. Compression time relay adjustment: According to the loose and tight compression items, set the appropriate compression time ( 1-30) Adjustable between seconds). 5. Heating time relay adjustment: according to the material and thickness of the packaging film used, set it to the appropriate heating time Between ( 1-30 seconds adjustable), when the film of the bag is thin, adjust the heating time to 2-4 seconds, when the film For thicker materials, adjust the heating time to 4-10 seconds. The heating time is appropriately adjusted according to the sealing effect. when When the stopwatch is adjusted to the 0 position, its working nature is empty operation, that is, the whole procedure is carried out as usual, but the sealing part is not heated. This function is very suitable for the adjustment and testing of the mechanical part. 6. Cooling time relay adjustment: according to the material and thickness of the packaging film used, set it to the appropriate cooling time. Between ( 1-30 seconds adjustable), when the film is thin, please adjust the cooling time to 1-3 seconds, when the film is thicker When making materials, adjust the cooling time to 2-4 seconds. When the stopwatch is adjusted to the 0 position, the machine does not seal when it is working. Cooling time. 7. The compression packaging machine belongs to electrical machinery products. When using the voltage, the chassis must have a good protective grounding. When the machine is used for a period of time, the screw nut should be tightened. The triple piece and the guide post should be refueled in time and the oil-water separator should be drained and placed. Work with water to ensure that the machine is working properly. Sadao compression packaging machine safety precautions 1.     During the operation of the compression packaging machine , it is never allowed to put the palm or other items into the lower part of the open compression plate. And on the sealing frame, otherwise it will lead to accidents and damage to the machine. 2. During the operation of the compression packaging machine , if there is an emergency, please press the red emergency stop button immediately to cut off the power. Mill Alloy Casting Ball,Corrosion Resistance Chrome Ball,Chromium Steel Balls,Corrosion Resistant Cast Ball Xuzhou Surun wear-resistant material Co., LTD , https://www.suruntools.com
Pneumatic compression packaging machine operating instructions