Recently, some customers have responded to the problem of using the electromagnetic induction aluminum foil sealing machine. The following points have been learned: the use of aluminum foil sealing machine for beginners to improve work efficiency and the full use of the sealing function of the sealing machine can do more with less.

First, choose the right purchase, not blind:

1. Measure the diameter of the sealing bottle before purchase and choose the appropriate sealing model.

2. Defining the sealing speed of the assembly line every minute, choose the right power model.

Second, reasonable installation: the aluminum foil sealing machine is moved to the production line, the pulley of the sealing machine chassis is stuck, preventing the secondary movement position and affecting the sealing.

1. Adjust the vertical height of the sensor head, just through the bottle.

2. Adjust the center point of the sensor head to align with the center of the pipeline.

Combine the above two points for sealing debugging.

Third, the sealing adjustment: clear the line speed, adjust the output power of the sealing machine according to the speed. If the speed is fast, the output power of the seal is adjusted from high to low, and the reaction is also the same. Use several bottles to test seals, see the effect, and determine the output power.

1. The aluminum foil on the bottle mouth is burnt, the current output power is halved, and then fine-tuned according to the seal.

2. The aluminum foil and the composite paper pad are not disengaged, the current output power is reduced by 1/3, and then fine-tuned according to the sealing.

3. For the disengaged, there is a circle of black and yellow marks on the composite paper pad, and the current output power is finely adjusted to one segment.

According to the above three points to adjust, to ensure the firmness and aesthetics of the seal.

Fourth, carry out spot checks: According to the above three major points, the prelude of the sealing is basically completed, and the operator can put the sealing machine into the production with confidence. After the seal is over, random check will be conducted to see the sealing effect, to ensure the smooth delivery of the product and market sales.

Concerned about surprises

Label: Tips for using electromagnetic induction aluminum foil sealing machine

Previous: Brush treatment using less than expected results Next: Plastic blown film machine workflow

STAINLESS STEEL PRODUCTS

Stainless steel is a corrosion resistant steel alloy with a minimum of 10% chromium. There are different grades and surface finishes of stainless steel produced to accommodate the environment in which the material will be implemented. Unlike carbon steel, stainless steel does not rust when exposed to air and moisture due to the sufficient amount of chromium present. The chromium creates an invisible passive film of chromium oxide that will not let oxygen attack the surface and prevents rusting of the iron base.

Yuhong Group is a stainless steel manufactory of more than 20 grades of Stainless Steel.

Stainless Steel U bend Tube

Stainless Steel U Bend Tube,U Bend Seamless Stainless Steel Tube,U Shape Stainless Steel Tube

YUHONG GROUP CO.,LIMITED , https://www.jessro-pipefittings.com