When summer arrives, many items in the home need to be carefully maintained, otherwise it will easily cause bad changes in the wet summer and affect the service life. The same is true for aluminum alloy doors and windows in the home, which requires good maintenance. Jiuzheng Building Materials Network provides 7 coups to help you maintain aluminum alloy doors and windows in summer. Aluminum alloy doors and windows maintenance has a coup 1. When the aluminum alloy doors and windows are in use, the action should be light, and the push and pull should be smooth; if it is found to be difficult, do not hard pull hard, and the fault should be eliminated first. Ash accumulation, deformation is the main reason for the difficulty in pushing out new doors and windows of aluminum alloys, to keep the door frame clean, especially the cleaning of the sliding groove. A vacuum cleaner can be used to remove the ash from the inside of the tank and the door. 2. When cleaning aluminum alloy doors and windows, people should not step on the aluminum frame, and do not hold the frame for support. 3. Aluminum alloy doors and windows can be cleaned with water or neutral detergent with a soft cloth. Do not use ordinary soap and washing powder, and do not use strong acid and alkali cleaners such as decontamination powder and toilet cleaner. 4. After the rainy day, the wet glass and door and window frame should be wiped out in time, paying special attention to drying the chute. The chute is used for a long time, the friction is increased, and a little oil or a layer of fire wax oil can be added. 5. Always check the joints of the aluminum alloy frame, tighten the bolts in time, and replace the damaged parts. Loosen the vulnerable parts of aluminum alloy doors and windows such as shaft pins, wind braces, and floor springs. Always check them regularly and keep them clean and flexible. 6. Sealing tops and glass seals are the key structures to ensure the sealing and insulation of doors and windows. If they fall off, they should be repaired and replaced in time. 7. Always check the joints of the aluminum alloy frame wall. If it is loose for a long time, it will easily deform the whole frame, so that the doors and windows cannot be closed and sealed. Therefore, the loose screw at the joint should be tightened immediately. If the base of the screw is loose, apply a small amount of cement to seal with a strong epoxy glue. [Follow the WeChat public number "Jiuzhengmen Window Network" to view the latest hot article "The door and window store business is very bad, what should I do?" More industry exchanges please join the Jiuzhengmen window network exchange group] Liugong Engine Turbocharger,Wheel Loader Engine Turbocharger,Liugong Engine Fuel Injection Pump,Liugong Engine Parts JINING SHANTE SONGZHENG CONSTRUCTION MACHINERY CO.LTD , https://www.sdkomatsugenuineparts.com
Aluminum alloy doors and windows maintenance has a coup