Hollow glass hot melt

1. Clean the aluminum partitions for use.

2. Put the butyl hot melt sealant into the extruder cylinder and preheat it to 130-140°C. After the thermostat is kept at a constant temperature, apply a strip of rubber to check the uniform line and apply the strip to the aluminum spacer groove. , After a little cool and clean glass pressure synthetic hollow glass semi-finished products.

3. After the outer sealant has been applied and cured, it will be the finished hollow glass product.

4. When using the imported fast-squeeze glue machine, the temperature of the rubber tube should be increased by 10-15°C, and the extrusion pressure should be adjusted from 150Mpa to 170-200Mpa.

Caution: When using butyl hot melt sealant, keep hands clean. Do not apply dust, oil and solvents (such as acetone, gasoline, etc.) to the surface of the adhesive. When touching hot glue, be careful of scalding. The gloves that touch the glue should be clean and free from burrs or other contaminants that are easily stuck on the glue. When butyl hot melt sealant is used, it should be controlled below 160°C. It is strictly forbidden to apply glue above 170°C in order to avoid degradation of the glue.

Purchase material glass

Medical Accessories

CNC medical accessories refer to precision components used in medical devices that have been produced using computer numerical control (CNC) machines. These accessories are precise and accurate, making them an essential part of medical devices that require high-quality equipment.


CNC medical accessories offer several advantages over traditional manufacturing methods. Due to the precision of the CNC machines, they can create complex parts to exact specifications with minimal errors. This ensures that each component is precisely crafted, leading to high-quality medical accessories that offer superior performance and safety.


CNC medical accessories are used in a range of medical devices, including surgical instruments, implants, and diagnostic equipment. They are produced using a range of materials, including stainless steel, titanium, and plastic.


One of the significant advantages of CNC medical accessories is their versatility. The CNC machines used to produce these accessories can create parts in a wide range of shapes and sizes, making them suitable for a variety of medical applications. Additionally, they can produce parts with intricate shapes and features that would be challenging, if not impossible, to create using traditional manufacturing methods.


CNC medical accessories are also durable and can withstand rigorous medical environments, including sterilization procedures. This ensures that these accessories provide consistent and reliable performance throughout their lifetimes.


Finally, CNC medical accessories are also beneficial in the development of new medical technologies. With their ability to produce complex and precise parts, these accessories offer researchers and manufacturers the ability to create innovative medical devices that provide superior performance and patient outcomes.


In summary, CNC medical accessories are vital components of the modern medical industry. Their precision, accuracy, and versatility make them an essential tool for a wide range of medical applications. With their ability to produce complex and precise parts, they offer the potential for the development of innovative medical technologies that offer high performance and safety for patients.

Hospital Bed Accessories,Oxygen Tank Holder,Oxygen Cylinder Accessories,Stethoscope Watch

Lizhi Precision Manufacturing Technology Co.,Ltd , https://www.lizhihardware.com