Ningbo Wason Lighting Technology Co.,Ltd , https://www.nbwasonled.com
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge> "Rolling bearing" table packaging method Detailed description of the packaging method in the "rolling bearing" table
Bearing packaging This sub-package and outer packaging. After the bearing is finished and qualified, it will be cleaned and rust-proofed; then placed in the inner packaging; to achieve waterproof, moisture-proof, dust-proof, anti-shock, and dimensional. . /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
Bearing packaging this sub-package and outer packaging.
After the bearing is finished and qualified, it shall be cleaned and rust-proofed; then placed in the inner packaging; to achieve waterproof, moisture-proof, dust-proof, anti-shock, protect the quality and precision of the bearing and the intention to use and sell. .
The inner packaging of the bearing is divided into three categories according to the anti-rust period:
1 Short anti-rust period packaging: anti-rust period 3 to 6 months; suitable for large-volume delivery to the same subscriber; bearing put into use in a short period of time. After two sides agreement; easy to use as a guideline; use simple packaging.
2 usually rust-proof period packaging: rust-proof period of one year; suitable for the bearing of common use.
3 long anti-rust period packaging: anti-rust period of two years; suitable for special and fine bearings.
Bearing inner packaging materials include polyethylene plastic tube (box), kraft paper, plain and crepe polyethylene composite paper, carton, polyethylene or polyethylene plastic film, nylon fastening tape or plastic fastening tape, waterproof high-strength plastic tape , linen bags, etc. The above information must be ensured that the corrosion resistance function of the data is qualified.
Guidelines for bearing inner packaging methods:
1 miniature bearing: every 10 to 15 sets of bearings are loaded into a plastic cylinder; every 5 to 10 plastic cylinders are packed into a carton (or bag, roll).
2 medium and small bearings:
Multiple sets of bearings are wrapped in polyethylene film, external kraft paper or polyethylene composite paper.
Multiple sets of bearings are loaded into a plastic cylinder (box),
Single set of bearings are packed in polyethylene film bags; fold or seal the mouth of the bag and then load a carton.
3 large bearings:
Packed in a single film of polyethylene film or polyethylene composite paper; then put into a carton,
Use polyethylene film bag; single set of folded bag mouth; then put into a carton,
Single set into a special plastic box,
Single set of three-layer wrapped package: polyethylene film tape or composite paper tape for inner layer; fastening tape for middle layer; waterproof and saturated plastic tape for outer layer.
4 extra large bearings:
Single set of three-layer wrap packaging (ibid.),
Single-layer four-layer wrapped package: wrapped in the above three layers wrapped; the outermost layer is wrapped in a layer of linen tape.
For separable tapered roller bearings with an outer diameter of ≥150mm; the polyethylene film should be placed before the inner and outer components before packaging; or the inner and outer components should be separated and packaged separately.
For exchangeable cylindrical roller bearings with an outer diameter of ≥150mm; it is simply scratched by the package; it can usually be separated and packaged separately by the components inside the watch.
The usual information and requirements for bearing outer packaging are as follows:
1 double corrugated box; the total weight (gross weight) of each box does not exceed 25kg; the outside of the box is bundled with plastic strapping.
2 nail box (wooden box); the total weight of each box does not exceed 30kg; the outside of the box is bundled with blue steel belt,
3 calcium plastic corrugated box; the total weight of each box does not exceed 25kg; the box loves to be strapped with plastic strapping.
When the bearing product with the inner packaging is put into the box; the plastic bag or plastic film should be padded in the box first, if there is empty space in the box; it needs to be filled with dry materials such as corrugated paper and paper scraps.
Recommend to friends comments close window Bearing related knowledge The basic requirements of the rolling bearing on the data function, the several combinations of the combined bearing, the analysis of the bearing, the diagnosis of the hot oil removal motor bearing, the consideration of the radial clearance of the bearing
This article links to http://
Please indicate the bearing network http://
Previous:Precautions in bearing application and selection Next: Gear transmission drawing process
Detailed description of the packaging method in the "rolling bearing" table
Source: China Bearing Network Time: 2018-03-27