Carpentry is a craft, a unique technology, and is commonly used in architecture. It is one of the three traditional Chinese lines (wooden, wood, and carpenter). It is said that in the ancient times, when houses were built, the day when the house was built and the roof was built must be "carpentry"! When the town was evil, the carpenter took a stand-alone tool to stand on top of the roof and shouted for the words of good fortune in order to protect the future peace and prosperity! In today's society, "carpentry" has a wide range of professional applications. Today, Xiao Bian gave everyone the relevant knowledge of woodworking to see what are the woodworking materials . Woodworking process First, the rough woodworking phase staffing: 1, carpentry (general 2-3 people) 2, small workers (can hire another 1) Generally about 4 weeks, depending on the size of the house and the difficulty of construction, it will be different. Second, the work process: 1, the production of ceiling base 2, the production of modeling wood for the grass-roots 3, making door base layer 4, making staircase railings 5, the production of wooden window base 6, making wooden cabinets 7, cover the surface of wood works 8, wood for the primer 9, covered gypsum board ceiling 10. Post door line (after mason is finished) 11. Install door (after mason finishes) 12, kitchen bathroom ceiling (after the completion of the mason) 13, install wooden keel Woodworking materials are generally: plate (large core plate, tooth plate, Ozon plate, etc.) 9 PCT board, 15 PCT board, 18 PCT board, panel (various tone wood grain), opal glue, stud Such as nails, shut lines, wooden side, Etquar, paint and other materials. There is no good brand of tooth plate, but it is said that environmental protection is a bit, I do not agree, because there is no brand means that the quality has not been monitored by the national quality inspection department, how to protect the environment? Milky white glue is generally selected wooden boat. Paints from Huarun, Garbo, Nippon Paint, Dulux, Finlin, Master, Greenbo, Dufang, are all OK. Woodworking materials 1, Daxinban If it is E0 level is generally within the 130-160, of course, there are cheap, but the quality will be lower, the cheapest Daxin board can be sold more than 60 yuan, if it is recommended for home decoration you buy 130-160, both in terms of environmental protection and quality are plausible. 2, buckle board this thing is now applied very little, if it is home improvement, are using integrated ceiling, these two materials from the life, material prices and installation costs and buckle board are similar, of course, there are integrated ceiling The price is high, but the cheapest 30 yuan can be sold, including installation costs and accessories, the price and the buckle board is lower than the buckle board material and installation costs. 3. We called Jiuli board for the quadruped board. The price gap is not very big. Generally, it is about 40-45 yuan, and the price of insufficient thickness will be cheaper. The price of veneer is not easy to say. Generally, it is 3 and 4 centimeters. 3 centimeters of ordinary texture is about 40-70 yuan. All are good at 100 yuan. You don't know what texture you use. 4, gypsum board general market is divided into three grades, less than nine millimeters, nine millimeters full, and 12 millimeters. The price is from about 19-22 in the end from less than nine millimeters high, or about 23-30 in the full 9 or 9.5. 12 of more than 30 yuan. Woodworking acceptance process The majority of owners must do material acceptance when the woodworking decoration materials enter the market. The acceptance procedure must be strict, and the inspector should conduct necessary inspections on every type of woodworking material that enters the site, such as whether the material quality, specifications and quantity are related to procurement. The contract is consistent. 1. Notify the construction party of material acceptance Acceptance of woodworking materials is best arranged as soon as the material enters the market. Therefore, the agreed acceptance time is very necessary to avoid material entry, there is no time agreement, the acceptance of the material will affect the progress of the construction. 2. The acceptance personnel specified in the contract must be present when materials are accepted The home improvement contract stipulates that the acceptance of the woodworking materials must be signed upon arrival to avoid unnecessary troubles or disputes later. In material acceptance, the decoration company will inform the customer to see the site and the supervision and supervision will give them guidance and guidance. The owner can also check on the spot with the contract, quotation, and ruler. 3 , the acceptance procedure must be strict The inspector shall carry out the necessary inspections for each woodworking material agreement stipulated in the contract, such as material quality, material specification and material quantity. 4 , after the acceptance of acceptance on the acceptance form If the inspection result material is qualified, the acceptance person should sign the wood material acceptance form. This is a more complete process. This is because if the material was checked at the time of material arrival, the necessary procedures were not performed at the time. Afterwards, they repented, and they refused to accept the result of their acceptance. However, since the other party has no evidence in hand, there is no way to do so. The above is a description of the related content of the woodworking materials. I hope to help you. To learn more about carpentry, please continue to pay attention to this site information. Carpentry Woodworking Carpentry Fiberglass Tape Measure,Tape Line Measure,Magnet Tape Measure,Abs Fiberglass Tape Measure Shangqiu Hengli Measuring Tools Co.,Ltd , https://www.henglimtools.com
Woodworker Woodworking Acceptance Process