The PC monitoring station acts as an intermediate device for communication between the machine tool and the network device, and realizes the purpose of the remote network curse access control processing center by communicating with the remote network device. In addition, the PC monitoring station provides some technical and technical support and troubleshooting support for staff and maintenance personnel. Previous page next page
Sapphire windows are ideal for harsh conditions, including environments subject to high temperatures, high pressures, strong vacuum, or corrosive atmospheres.
Sapphire windows are extremely stable and resistant to attack by strong acid due to sapphire`s high dielectric constant.
Sapphire windows offer wideband transmission from UV to Mid-IR (0.15-5.5µm).
Sapphire windows can withstand considerably higher temperatures than most optical windows with zero degradation.
CCRQ supply a wide range of sapphire windows including
Round Sapphire Windows, Rectangle Sapphire Windows, Step Sapphire
Windows,Sapphire Tube, Sapphire Pin, Sapphire Rod Lens, Sapphire Light
Guide Block,Sapphire Prisms, Sapphire Ball Lens, Sapphire Half Ball
Lens, Sapphire Dome, Sapphire Wedged Window and Custom Sapphire Windows with various shapes and sizes.
Sapphire pin,Sapphire tube,Sapphire Bearing,Sapphire Light Guide Block,Sapphire Step window,Sapphire Optical Window Changchun Ruiqi Optoelectronics Co.,Ltd , https://www.ruiqi-optics.com
The overall structural design of the structural design RCCNCS is shown in Figure 2. Connected to the bottom PC monitoring station on the industrial field Ethernet, the real-time monitoring of the machining center CNC system is carried out by running the monitoring software of the machine tool, and the upper control host runs the remote control software to control the on-site PC monitoring station (also on the PC monitoring station) Run the remote control software). An upper control host can control multiple monitoring stations on the ground. The underlying generation monitoring station collects CNC processing information and deposits it into the internal database system of the enterprise through the local area network. When the remote PC accesses and controls the local machining center CNC system, it first accesses the enterprise server on the ISDN/Internet through the network access, and requests the control of the local PC monitoring station from the enterprise server. The enterprise server performs corresponding qualification and authorization and notifies the local PC monitoring station. After the remote control software is started and set to the corresponding working mode, the remote control PC can operate and control the CNC system of the machining center.
When the remote control PC establishes a connection with the local monitoring station, the operation of the remote PC to the numerical control system is the same as that of the local PC monitoring station to the numerical control system, and all the functions of the local PC monitoring station can be completed. 
image 3
Design and implementation of remote monitoring system for machining center (2)