Pipes used for welding, cutting or related process local exhaust ventilation must be made of non-combustible materials. These pipes must be inspected periodically as needed to ensure their function is stable and there must be no flammable residues on the inside surface.
Product advantages:
1. 100% fresh aluminum alloy 6063-T5, iron containing is less than 2% , sturdy and durable, full thickness 3.0mm.
2. 3 layer PVDF color coating, thickness more than 80 microns, excellent weather resistance, never fade,More upscale appearance.
3. 100% fresh virgin Bayer Polycarbonate Sheet, 30-50 micron anti-UV coating, can withstand 75% ultraviolet light, impact strength is 300 times that of ordinary glass, 10 years warranty.
4. The motor adopts the domestic leading brand and is guaranteed for 10 years.
5. Rugged and novel internal design, 3.0mm thick aluminum alloy profile, 4-10mm high strength impact resistant endurance board, can withstand snow loads of 30 to 45 cm.
6. High anti-aluminum structure provides maximum safety even in strong winds (strongest 12 winds) (34m / s strong wind).
Novel structure and easy installation
7. Packaging, protecting the product during shipping and making it easier to install.
Ventilation in an enclosed space
In addition to normal ventilation requirements, ventilation in welded and cut enclosures is also required to prevent accumulation of combustible mixtures and oxygen enrichment in the atmosphere.
Air used
The quantity and quality of the air used for ventilation must ensure that the concentration of harmful substances in the enclosed space is below the specified value.
Compressed air supplied to the respirator or breathing apparatus must meet normal breathing requirements.
The compressed air tube of the respirator must be a dedicated line and must not be connected to other lines.
Oxygen, other gases or mixtures should not be used for ventilation other than air.
Forced ventilation, supplied air breathing equipment or other suitable means must be used when performing welding, cutting or related work in areas where there is a direct risk to life and health.
Ventilation duct
Pipes used for welding, cutting or related process local exhaust ventilation must be made of non-combustible materials. These pipes must be inspected periodically as needed to ensure their function is stable and there must be no flammable residues on the inside surface.
Good product to share with you 
PROTAPE®PUR 370
Wear-resistant suction and blowpipe; ultra-lightweight, high flexibility and compression ratio 4: 1, braided
Can be used in printing machinery, air supply: UV dryer, infrared dryer
Welding fume purification
Suction arm, etc.
sharp
CP HiTex 467 WELDING 
Suction and blowing hoses are used to pump welding fumes and sparks during electric welding operations;
Tough, ultra-light compressible, up to 1.000 mm in diameter (temperature up to 260 ° C)
Can be used for welding fume purification, suction arm
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Pool Cover Polycarbonate,Pool Cover Sliding,Pool Cover Weights,Retractable Sunroom
FOSHAN KASO BUILDING MATERIAL CO.,LTD , https://www.kasocover.com