Office carpet installation points Office carpet which kind of material is good

Many people nowadays have beautiful carpets on the floor of the office when they are in the renovated office. After carpeting, not only can the office look more stylish, but it can also achieve the effect of attracting and reducing noise, thereby improving work efficiency. So what are the points we should pay attention to when installing office carpets? How should we buy the office carpet? The following Xiao Bian will share with you on these issues and give you a reference.

Office carpet installation points

We know that the renovation office will go through many processes, and each process has certain requirements and rules. Of course, the installation of office carpets is no exception. Everyone must first deal with the grass before installing the carpets. The surface of the grass-roots floor must be flat, free of pits, pits, cracks, and clean. After confirming that there are no problems in the grass-roots level, it can be laid.

Office carpet installation points two

The office carpet is generally not a large piece of carpet. It is made by splicing several pieces of carpets. Therefore, we must deal with the joints when laying. Generally speaking, there are two methods for joint processing, as follows: :

1, manual seam method: the carpet is turned over, so that the two seams flat, with a seam, brush white glue, paste leather adhesive tape. The stitches should be firm and the stitches need not be too dense.

2, adhesive tape method: the tape is laid on the floor by the bullet line, fixed at both ends, will be on both sides of the edge of the carpet pressed on the tape, and then use the electric iron on the adhesive-free surface of the tape to make the glue Melt, with the movement of the iron, use a spatula to press and level the joints at the joints to make them firmly connected. Use electric shovels to repair uneven villi at the carpet joints.

Office carpet installation points three

After laying the carpet, we also need to trim and clean it in order to achieve the best results. Everybody can use a file to cut off the excess, and use a flat spatula to put the edge into the gap between the clip and the wall. Finally, use a vacuum cleaner to remove dust.

Which kind of material is good for office carpets?

There are many carpet materials on the market. How should we choose? We know the area where office personnel are relatively active. Therefore, the floor of the office is preferably a carpet with squares or tiles. If the color is concerned, it is best to choose gray, which is more resistant to dirt and cleanliness. In addition, the chairs of the office often need to be moved, so it is not appropriate to choose high-quality carpets, and the carpet must also be wear-resistant and anti-static. Therefore, in terms of office carpet materials, it is best to choose loop or velvet. carpet.

The installation of carpets is not a simple matter. This is a very professional task. Therefore, Xiao Bian recommends that you look for a professional master to construct it to ensure the effectiveness of the construction. The above is the small series of office carpet installation points and what kind of material is good for office carpets to share, to give you a reference! If you have more questions, welcome to continue to pay attention to Qijia Information.

Spa 3 Places

Spa 3 Places,Hot Tub Above Ground,Outdoor 3 Person Hot Tub,Small Outdoor Hot Tub

SpaRelax Co., Ltd. , https://www.sparelaxoutdoorspa.com