With the improvement of the quality of life, with the increase of private cars nowadays, the demand for automotive supplies on the market is increasing. Among them, the use of glass water is the most, if it is still the previous production method, it can not keep up with the current market demand, which is also the use of glass water filling machine. The use of glass water filling machine is a development trend. In order to let everyone know more about the glass water filling machine, let me introduce some maintenance tips of the glass water filling machine vibrating screen. Concerned about surprises Previous: Take you up knowledge! Chainsaw logging saw structure and working principle Next: Simple repair yourself, several common hardware tools Hdmi Microscope Camera ,Hdmi Microscope ,Microscope Hdmi Camera,Digital Microscope With Hdmi Output Ningbo Beilun Kalinu Optoelectronic Technology Co.,Ltd , https://www.nbyxmicroscope.com
Glass water filling machine is widely used in various industries, and vibrating screen is an important component of glass water filling machine. It is necessary to maintain the vibrating screen of glass water filling machine during use. The common maintenance methods are: When the vibrating sieve machine of the glass water filling machine is shipped from the factory, the exciter is filled with lubricating oil and has anti-corrosion performance, which is valid for three months. After the storage period is more than three months, it will run for 20 minutes, and it can continue to be preserved for three months. It must be replaced with clean lubricating oil when working. The normal operation of the bearing should not exceed 75 °C. The new exciter has a running-in process. The temperature may be slightly higher, but after 8 hours of operation, the temperature should be stabilized. If the temperature continues to be too high, the oil level, oil level and oil cleanliness should be checked.
Always keep the vent hole of the glass water filling machine shaker open. If the oil still leaks after the unblocking, the oil seal should be replaced; when replacing the V-belt, the motor anchor bolt should be completely loosened, and the V-belt can be conveniently placed in the pulley groove, and the V-belt or other object is not allowed to be used. The tension of the belt must be suitable. The pulley must be aligned. After the first adjustment of the tension, the work is carried out for 48 hours and then re-adjusted. The bolts connected to the shaker and the screen box are high-strength bolts, and ordinary bolts are not allowed to be used. The tightening must be checked regularly, at least once a month. If any one of the bolts is loose, it will cause other bolts to be cut and cause damage to the screen machine. Where the ring groove rivets are used, it is allowed to be replaced by high-strength bolts. All contact surfaces or holes should be free of iron filings, ash, oil and rust. And burrs.
In order to better apply the glass water filling machine, we should pay great attention to the maintenance and maintenance of the equipment to ensure the true value of the equipment. I hope the above introduction will help everyone! 
How to make a glass water filling machine to save money, don’t watch, don’t regret it.