Concealed Shower Set,Wall Mount Shower System,Wall Mount Shower Head,Brass Wall Mount Shower Mixer FOSHAN SHAMANDA SANITARY WARE CO., LTD , https://www.shamandahome.com
2. The gas spring is a high-pressure product and it is forbidden to analyze, fire, and bump it.
3, gas springs should not be subject to tilt or lateral force in the work. Can not be used for handrails.
4. It is determined that the fulcrum installation position is a guarantee that the gas spring can work correctly. The gas spring must be installed in the correct way. That is, when it is closed, let it move through the centerline of the structure. Otherwise, the gas spring will often push the door open automatically.
5. To ensure the reliability of the seal, do not damage the surface of the piston rod. It is forbidden to apply paint and chemical substances on the piston rod. It is also not allowed to spray or paint after the gas spring is installed at the desired position.
6, the use of ambient temperature: -35 °C - +70 °C. (Specific manufacturing 80°C)
7, gas spring piston rod is strictly prohibited to rotate to the left. If you need to adjust the joint direction, you can only turn to the right.
8. Install the connection point, it should be flexible and can not be stuck.
9, choose a reasonable size, the size of the force to be appropriate, the piston rod stroke size to leave 8 mm margin.
Nine Precautions for Using Gas Springs
1, gas spring piston rod must be installed in the downward position, not flip, this can reduce friction and ensure the best damping quality and cushioning performance.