The corrugated metal hose belongs to the flexible pipeline component and is mainly composed of a metal corrugated pipe body, a stainless steel mesh sleeve and a joint member. Connected in the middle of the pipeline or equipment to compensate for relative displacement. When there are pumps and compressors in the working environment, vibration and noise will be generated, which will endanger the quality of the project and human health. The advantages of metal hoses just make up for this. It has good vibration isolation and noise reduction functions. Engineering quality and service life. Therefore, metal hoses are installed on the inlet and outlet of the pump. Due to its many functions, it is more and more widely used in engineering. However, the correct selection and use play a very important role in the life of the hose and the improvement of working conditions. The nominal pressure of metal hoses refers to normal temperature conditions. The general hydraulic test and the failure test are carried out under normal temperature conditions. The minimum bend radius Rs of the metal hose is a particularly critical parameter that is important to see in engineering and directly affects the service life of the hose. The working conditions in the actual working environment are various and the conditions of use are very complicated. Therefore, it is very difficult to give a versatility and accurate design of the bending radius by theoretical calculation. After the minimum bend radius of the metal hose is determined, the metal hose length should be correctly selected. If the hose is too long, it will cause instability, increase flow resistance, and additional mechanical operation vibration. If it is too short, it may not achieve the purpose of compensation, vibration and noise reduction, etc., and it will cause excessive bending stress and affect life. There are many factors to consider when determining the length of a metal hose. The first is the bending radius and the actual working environment. Soft connections are also divided into many types, such as threading, pipe, air conditioning, etc., the types of soft connections produced by our factory are mainly used in pipelines and air conditioners.

Botou Xinda Bellows Factory is a professional manufacturer of compensators, metal hoses and waterproof casings. It can produce stainless steel braided hoses of various materials such as 304/316/321 , and can produce all according to customers' needs. Stainless steel metal hose. Botou Xinda has many years of production experience, credibility, commitment, and problems during the warranty period to replace new products for customers. More details: http://

Schindler Elevator Spare Parts

Schindler Elevator Spare Parts, Schindler Elevator Parts

Schindler was founded in 1874 in Lucerne, Switzerland, and is one of the world`s leading providers of elevators, escalators, and moving walks, as well as maintenance and modernization services. The Group has over 1 000 branch offices in more than 100 countries, as well as production sites and research and development facilities in the US, Brazil, Europe, China, and India.

Schindler manufactures, installs, services and modernizes elevators, escalators and moving walks for almost every type of building requirement worldwide. The company specializes in the latest-technology engineering, as well as mechanical and microprocessor technology products designed and rigorously tested for safety, comfort, efficiency and reliability.

Inspired by the vision of being the best service provider in the industry for its customers, Schindler will continue in the future to develop highly innovative and user-friendly mobility solutions and to deliver these to the world market.

Schindler products can be found in many well-known buildings throughout the globe, including office buildings, airports, shopping centers/retail establishments and specialty buildings.

Schindler 3300

Capacity: 400 kg - 1'125 kg, 5 - 15 passengers
Travel height: up to 60m and 20 floors
Speed: 1.0 m/s and 1.6 m/s

Schindler 5500

Capacity: 630 kg - 2'500 kg, 8 - 33 passengers
Travel height: up to 150 m and 50 floors
Speed: 1.0 m/s up to 3.0 m/s MMR and MRL

Schindler 7000

Global high-rise solution for your landmark building
Single- and double-deck elevators
Capacity: 4'000 kg (single-deck) or 2x 2'250 kg (double-deck)
Travel height: up to 500m
Speed: 10 m/s

Schindler Elevator Spare Parts, Schindler Elevator Parts

CEP Elevator Products ( China ) Co., Ltd. , https://www.zjsmartcommercialescalators.com