Hard hat selection and use

1. Hard hat choice

In order to protect the safety of the head during work, it is very important to choose a suitable safety helmet. When selecting a hard hat, the main issues to note are:

(1) Safety helmets should be selected for different protective purposes, such as protective helmets that fall off and impacted; helmets that prevent head injuries when people fall from high places or throw them out of the vehicle; used in electrical engineering. Pressure insulation helmets and so on.

(2) The quality of the helmet must meet the technical specifications stipulated by the national standards. Manufacturers and sellers must have production licenses issued by the state. The helmet material should be as light as possible and strong enough.

(3) The design of the safety helmet should be reasonable in structure, and it should be comfortable, light, not sultry, dustproof and dustproof when used.

2. The use of hard hats

Choosing the right helmet, the correct method of use is equally important. When using a hard hat, pay attention to the following points:

(1) The elasticity of the cushioning pad is adjusted by the straps. The space between the top of the head and the top of the cap must be at least 30 mm in order to ensure that the cap body has enough space for deformation during the impact, and at the same time, the cap body is favorable. Ventilation between the head and the head.

(2) Wear a positive helmet when using it, otherwise it will reduce the protective effect of the helmet on the impact of the object. The straps of the helmet must be fastened. If the helmet is dislodged due to running in the event of danger, no protection will be provided.

(3) Since the helmet will be gradually damaged during use, regular inspections should be conducted to check for cracks, dents, cracks, and wear. Be careful not to wear defective caps. Because the cap material has the property of aging and brittleness, be careful not to expose it to sunlight for a long time. The cap liner is easily damaged due to sweat soaking, it should be cleaned frequently and replaced immediately after damage.

(4) The most important thing is that the use of safety helmets should be regulated by rules and regulations and strictly implemented. In the work, we constantly carry out propaganda and education so that employees develop the habit of consciously wearing a safety helmet.

This website solemnly declares: This article is the reprint of the online media, only represents the author's point of view, has nothing to do with this site. If news articles and comments infringe your legal rights, please call us and we will handle it in a timely manner.